Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Warning Subarea: Original Author: Bentley Technical Support Group Problem: What does te following warning mean and how to resolve it? W2164-12:System contains Gaps/Friction/Soil data. Please enable non-linear option in the following Analysis sets Answer: As mentioned, the warning explains that there are gap, friction, and/or soil value(s) that have been applied in the model, and if they are to be considered, must enable the option to perform a Non-linear analysis. Remember, a Linear Analysis will ignore al gap, friction, and soil settings when performing an analysis. Please see the following AutoPIPE help section: Help Contents Contents Tab Reference Information Analysis Considerations Static Analysis NonLinear Analysis Nonlinear Analysis - Gaps, Friction and Soil Yielding Included. As mentioned in the online help: The nonlinear effect is specified by enabling the "Gaps/Friction/Soil" option in the Static Analysis dialog. Note:: this dialog above can be accessed by selecting Load Static Analysis Sets select any analysis set, enable the Non-linear check-box indicated below Or select the analysis set and press the modify button, See Also Bentley AutoPIPE External Links Bentley Technical Support KnowledgeBase Bentley LEARN Server Comments or Corrections? Bentley's Technical Support Group requests that you please submit any comments you have on this Wiki article to the "Comments" area below. THANK YOU!
↧