Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Analysis Subarea: Original Author: Bentley Technical Support Group The following message screen is displayed in the Flange Analysis module. What should I do now? --------------------------- Bentley AutoPIPE --------------------------- The required information is missing for this flange. --------------------------- OK --------------------------- Answer: There are some facility in the system which may be something we can make use of. There is an option to “Highlight incomplete flanges” What this does is that it highlights all flanges in red that do have some missing data. Selecting any of these flange in the data row – highlights the tabs on the grid on which data is required. For A09F – Load, Flange, Pipe, Bolts and Gaskets – all tabs need to be reviewed. Whereas for B03 F – loads are ok. But rest of the tabs need review. Now what is even more useful is that if you now go to any of these tabs – it does tell you which data is missing by highlighting it in appropriate color used for the tab. Say we go to flange tab for B03 F – and this is what we see. You can clearly see the fields boxed in green – are missing data. Similarly for pipe tab – the data is boxed in yellow. See Also Bentley AutoPIPE External Links Bentley Technical Support KnowledgeBase Bentley LEARN Server Comments or Corrections? Bentley's Technical Support Group requests that you please submit any comments you have on this Wiki article to the "Comments" area below. THANK YOU!
↧