Problem: Item #1: Flange Optimization Item #2: Flange Bolt tensioning Item #3: Customize in such way that the projection depends on the insulation thickness Item #4: Nozzle fillet radius calculated for WRC calculation Item #5: Nozzle loads added in the 6 related fields are not matching the table in the Nozzle Loading file Item #6: Different standards for projection nozzles Item #7: Model a nozzle attached directly to cone small diameter end Item #8: Interesting artical: FEM Analysis of a Large Nozzle-to-Cylinder Shell Junction Item #9: Model a Nozzle on a Nozzle Item #10: Model a Nozzle for tank drain Item #11: Model internal piping Item #12: Flange calculations does not consider corrosion allowance or flange facing height See Also AutoPIPE Vessel FAQ
↧
