Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Licensing Subarea: Original Author: Bentley Technical Support Group Problem: Do I need to install AutoPIPE Standard, Advanced, & Nuclear on my computer? Answer: AutoPIPE is available with 3 different levels of the program + some add-on features. To make things easier on the user only 1 application needs to be installed. All the features for Standard, Advanced, and Nuclear editions are already inside of the program. It all depends on the Edition selected for what feature can be used in the application at that time. Procedure: 1. Start AutoPIPE, press OK to revert to DEMO mode, select Tool Setting License Management Tool . 2. After The License Management Tool (LMT) application has been started, select the License Checkout tab: a. Now press F9 button on the keyboard to send logs now. b. Afterwards press F5, to refresh your screen. 3. Search the Product listing to confirm what edition of AutoPIPE is available on your SELECTserver. 4. Leave the LMT window open and go back to AutoPIPE, select Tools Settings Edition. The following dialog should be displayed: 5. Look again back to LMT, what editions of AutoPIPE are currently available ? In this example: Listed: AutoPIPE Standard AutoPIPE Nuclear AutoPIPE Stress Iso Add-on Available: AutoPIPE Nuclear AutoPIPE Stress Iso Add-on Select the radio button for any edition / Add-on that are available and press the OK button. AutoPIPE will verify the licenses on LMT and if successful, enable those feature applicable to that edition in the program. For a complete list of the features associated with an edition, please see the following AutoPIPE help section: Help Contents Contents Tab Bentley AutoPIPE Getting Started AutoPIPE Standard vs Advanced vs Nuclear Note, If Advanced was selected above, after pressing OK button, the program would check LMT for an available license, LMT would return a No response, and AutoPIPE would have reverted to DEMO mode. Again, only those available AutoPIPE editions listed in LMT can be selected under AutoPIPE's Tools Settings Edition dialog screen. See Also Bentley AutoPIPE External Links Bentley Technical Support KnowledgeBase Bentley LEARN Server Comments or Corrections? Bentley's Technical Support Group requests that you please submit any comments you have on this Wiki article to the "Comments" area below. THANK YOU!
↧