Applies To Product(s): AutoPIPE, Version(s): V8i Environment: N/A Area: Warning Subarea: Original Author: Bentley Technical Support Group Problem: The following occurs when using AutoPIPE V8i analyze all with hanger selection: Intel(r) Visual Fortran run-time error Forrtl: severe (38): error during write, unit 6, file CONOUT$ Answer: If a model has hanger supports and it also reports warnings during analysis then program may crash when "Analyze Analyze All..." operation is executed with "Select analyses automatically " option selected. Workaround for the issue is - Run hanger analysis separately (Analyze Hanger Selection…) - Uncheck “Hanger Selection” on analyze all dialog. The issue is repeatable but is very tricky. - Reproduce only when analyze all operation is performed with Hanger Selection selected. And any other analysis type is selected with conditions There must be an analysis warning. And The warning shall be different than the one given during hanger selection. - If sum of following exceeds 63 Number of lines on last page of hanger report Number of lines in analysis warning given after hanger selection. This issue was logged under TFS-D 123863: "Analyze All" operation causes program crash on models having hanger support and some analysis warnings. This will be fixed in a future release of the application. See Also Bentley AutoPIPE External Links Bentley Technical Support KnowledgeBase Bentley LEARN Server Comments or Corrections? Bentley's Technical Support Group requests that you please submit any comments you have on this Wiki article to the "Comments" area below. THANK YOU!
↧