Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Grids Subarea: Original Author: Bentley Technical Support Group Problem: When I press the button to diplay the input grid, they do not appear on screen, where are they located? Answer: From your description, it appears that your results grid are being displayed out of view or off screen. First make sure the Input grid button Icon is depressed (look on top tool bar for button icon with lower case i and small excel grid image, when pressed the button will have a definitive pressed down look). If the input grid is minimized, with the icon button depressed, search the screen for a small application bar, may only see the AutoPIPE icon, with Minimize(_) & Close (X) windows icons. Press the Maximize icon or grab the corners of the dialog to stretch out to view the grid. If you still do not see the grids, see below: AutoPIPE V8i 9.4 and higher: Restart the program; the new version will sense if the grids are outside the resolution of the screen area(s) and reset the grid location based on default values. If this does not work, perform the steps below for AutoPIPE 9.3 and lower. AutoPIPE V8i 09.03 and lower Please see the following procedure to reset the results grid location. 1. Exit AutoPIPE 2. Start Notepad program3. Select File Open Navigate to the AutoPIPE installation folder, change "Files of Type" from "*.txt" to "all files", select "autoplan" from the available files listed, and press the "Open" button. 4. Scroll down to the bottom of variables and make the following changes: Note: 1. Maintain column alignment. 2. RESDLG = Results Dialog grid, MODDLG = Input Dialog grid 3. These are pixel dimensions starting from lower left corner of the screen RESDLG TOP : 600 RESDLG BOTTTOM : 1000 RESDLG LEFT : 50 RESDLG RIGHT : 1200 MODDLG TOP : 600 MODDLG BOTTTOM : 900 MODDLG LEFT : 100 MODDLG RIGHT : 900 5. Save the file, and exit notepad. 6. Start AutoPIPE, open a model with results and press Results Grids 7. The results grid should show up in the new location. You may resize the grid and move to a new location. The new grid location values are saved back to the autoplan.cnf and will be recalled when the command is given to display the results grid. In the future do not use the input grid (minimize, maximize, close) window icons to manipulate the grid, instead use the actual tool bar button. Also, if using a docking station with 2+ monitors, before disconnecting, move input grid to same monitors as the application screen before closing AutoPIPE and shutting down the system. See Also Bentley AutoPIPE External Links Bentley Technical Support KnowledgeBase Bentley LEARN Server Comments or Corrections? Bentley's Technical Support Group requests that you please submit any comments you have on this Wiki article to the "Comments" area below. THANK YOU!
↧