Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: modeling Subarea: Original Author: Bentley Technical Support Group Problem: How to model a Trunnion pipe support in AutoPIPE? Answer: There a couple different methods to model a Trunnion pipe support in AutoPIPE. Consider using one or a derivation of the following methods: Option #1: Please see the following AutoPIPE help section: Help Contents Contents Tab Modeling Approaches Modeling Approaches Support Model 2: Trunnion Support Option #2: Model a rigid Beam that does not include weight from the center of the pipe to the outside surface of the pipe. From this point, add another beam with specific section properties to the actual support location (i.e. anchor component or another beam that is part of a structural support system built in the model). Option #3: Similar to the Option #2 above, but with Piping components. a. Insert a Tee component at the node point, Tee type = Other, SIF in/ out = 1.00. b. On the Tee Branch insert a run of pipe to the outside surface of the main pipe run c. Select this short run of Pipe, Insert Rigid options over range : Include Weight = unchecked (OFF) Include Thermal Expansion = checked (ON) Wire frame View below: d. From the node point located on the surface of the pipe, insert User SIF value representing the welded connection and insert a pipe run, using updated pipe properties, to the actual support location (i.e. anchor component or another beam that is part of a structural support system built in the model). e. At the pipe surface interface where the trunnion is connected to the pipe insert a Reference Point: AutoPIPE V8i 09.06.01.xx and lower: Insert Xtra Data Reference Point with "Report Reference Points results to AutoPIPE Nozzle/AutoPIPE Vessel" option checked ON. With AutoPIPE Advanced or Nuclear edition, using File Export Nozzle Loads to AutoPIPE Nozzle evaluate stresses of trunnion on pipe. See Also Bentley AutoPIPE External Links Bentley Technical Support KnowledgeBase Bentley LEARN Server Comments or Corrections? Bentley's Technical Support Group requests that you please submit any comments you have on this Wiki article to the "Comments" area below. THANK YOU!
↧