Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Error Messages Subarea: Original Author: Bentley Technical Support Group Application Error - 0xc0150002 AutoPIPE Preview Handler error on installation E15-13: PXD file is needed for accessing AutoPLANT data in this model Please place PXD and PXH files in same directory as DAT file. E13-16: Cannot Find the specified units file E21-40: Executing this operation can corrupt distributed load records in AutoPIPE E38-95: Cannot insert component after a tee E90-21: Analysis results do not exist E175-28: Error in velocity profile specification E512-65: the model cannot be opened E512-149: Model name must not contain space character before extension E522-33: Cannot complete the paste operation E723-23: System is not complete for analysis purposes E726-104: Zero length not allowed at beam XX E732-2: Angle is 180 deg. at bend xxx E732-3: Not enough clearance to fit bend xxx E737-26: Valve components are not permitted in HDPE pipe system as per CC N-755-1 E751-1 Tee type gt 8 or lt 1. SIF not calculated E801-1: FATAL ERROR: Unstable System E801-3: No static load cases specified E801-4: Zero length element E801-5: Zero Element Stiffness in AutoPIPE E801-11: Fatal Error: no mass in the system E801-12: Cannot find next frequency E801-75: Cannot allocate memory for analysis, unload some applications. E801-135: Number of analysis nodes exceeds maximum limit of 10000 nodes E829-1: Incorrect model size in file Static analysis results will be ignored. E951-3: Expecting real input. Re-enter Answer: insert a valid value into the current filed before selecting a different cell / OK button. E962-1: File read error, please contact BENTLEY E962-2: File write error, check disk space No Piping with OD >= 1.400 inches is found in PXF file "Root Element Is Missing"
↧