Wiki Page: 05. What references were used to create AutoPIPE's code and non-code material libraries?

Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Subarea: Original Author: Bentley Technical Support Group Problem: What references were used to create AutoPIPE's code and non-code material libraries? Answer: Refer to the online help for references used by AutoPIPE to create the libraries: Please see the following AutoPIPE help section: Help > Contents> Contents Tab> Reference Information> Libraries> A. Standard Pipe Materials (find description with reference to Thermal Exp Coeff & Young's Mod). B. Code Dependent Pipe Materials (find Yield Stress & Allowable Stress code ref. including a reference to the Standard Pipe Material listing above). Example, what reference was used to create the material library for ASME B31.3 - 2010, A53-A: From the Code Dependent Pipe Materials, find the following: Use CS, and open the same code year Standard Pipe Material library to find the following: Answer: Yield Stress values were taken from ASME IID Allowable Stress value were taken from ASME B31.3-2010 Thermal Expan. Coef. values were taken from ASME B31.3-2010 Young's Modulus values were taken from ASME B31.3-2010 Note: click here to see details to make changes to AutoPIPE's material library file. See Also Bentley AutoPIPE External Links Bentley Technical Support KnowledgeBase Bentley LEARN Server Comments or Corrections? Bentley's Technical Support Group requests that you please submit any comments you have on this Wiki article to the "Comments" area below. THANK YOU! What references were used to create AutoPIPE's code and non-code material libraries?