| Applies To | |||
| Product(s): | AutoPIPE, | ||
| Version(s): | 2004, XM, & V8i | ||
| Environment: | N/A | ||
| Area: | Enhancements | ||
| Subarea: | |||
| Original Author: | Bentley Technical Support Group | ||
The following ASME B31.3 enhancements have been logged for inclusion into a future version of AutoPIPE:
Note: if an enhancement has not already been added to the program, log an enhancement request with the respective CAE number. The more requests per an enhancement, the quicker the CAE development team will add that feature to the program.
CAE-CR-10311: Online help for Use Alt. Occ. Allow must include a table for ASME B31.3 2010
Description: The Allowable Occasional Stress depends upon the Tcr values of the material used defined in the library instead of the operating temperature. The Online help for "Use Alt.Occ.Allow" does not have the table for ASME B31.3 2010 and only includes table for B31.3 2006 and before.
Development Project: TBDCAE-CR-10585: Add B31.3 2012 piping code
Development Project: 9.6.0- CAE-CR-10741: B31.3-2010: Add functionality for user to enter axial and torsional SIF
Description: ASME B31.3 2010 edition uses axial and torsional SIFs when calculating Sustained stresses. The default values for both the SIFs are 1.0 in absence of more applicable data. This enhancement will allow the user to be able to enter Axial and Torsional SIF values using the User Joint & SIF dialog. These values will be used in sustained stress calculations.Development Project: 9.6.0
See Also
External Links
Bentley Technical Support KnowledgeBase
Comments or Corrections?
Bentley's Technical Support Group requests that you please submit any comments you have on this Wiki article to
the "Comments" area below. THANK YOU!