Wiki Page: Reports - AutoPIPE

Topics under the heading should be based on:

Input/output reports: Formatting or Reporting issues

1. Be sure to review AutoPIPE's online help:
   
   Help > Contents> Contents Tab> Reference Information> Results Interpretation>   
   
   This appendix explains how to interpret AutoPIPE's output report results. The coordinate systems used for the results presentation are particularly important, and are listed first. The output sign conventions for the different result types are then described.
   
        - Coordinate Systems
        - Total vs. Incremental Loading
        - Pipe Displacements
        - Pipe Forces and Moments: Global Option
        - Anchor Forces
        - Support Forces: Hangers and V-stops
        - Support Deformations: Hangers and V-stops without Gaps
        - V-stops with Gaps and Friction
        - Hangers and V-Stops with Imposed Displacement
        - Two-Point Hangers and V-Stops
        - Straight Pipe Forces and Moments: Local Option
        - Support Forces for Guides and Line Stops without Gaps
        - Support Forces: Guides & Line Stops with Gaps & Friction
        - Two-Point Guides and Line Stops
        - Curved Pipe Forces and Moments: Local Option
        - Support Forces for Skewed Supports
        - Support Forces for Tie/Link Restraints
        - Beam Member Forces
        - Dynamic Support Forces

2. See the following hyperlink for issue on the respective Anslysis Output sub report:
   Command: Analyze model> Results> Output Report...
   
        - Displacement
        - Support
        - Restraint
        - Forces & Moments
        - Code Compliance
        - Stress Summary
        - Frequency
        - Mode shapes
        - Equipment
        - Soil
        - Bend Angular Distortion
        - Stress Indices
        - Tee Plastic Strain
        - Beam forces
        - General stress
        - Preliminary Stress
        - Accelerations
        - Flange Summary
        - Model listing
        - Analysis summary
        - Steam Relief
        - Reference Loads
        - Fatigue
        - Result summary

3. See the following hyperlink for issue on the respective Component Data listing (aka Model Input Listing) report:
   Command: Toos> Model Input listing.  
   
        - Extended Component (Point in v6.1)
        - Coordinates (Component in v6.1)
        - Pipe Properties
        - Material Properties
        - Material Allowables
        - Temperature & Pressure
        - Beam
        - Forces & Displacements
        - Thermal Anchor Movements
        - Seismic Anchor Movements
        - Center of Gravity
        - Earthquake Scale Factors
        - Design Temp and Press
        - Soil Properties
        - Load Summary
        - Support
        - Bend
        - Tee
        - Valve
        - Flange
        - User SIF
        - Reducer
        - Rigid Pipe
        - Reference Points
        - Gross Discontinuity Stress
        - Segments Data

4. 
     

5.