Applies To Product(s): AutoPIPE Version(s): 2004, XM, V8i Environment: N/A Area: Subarea: Original Author: Bentley Technical Support Group Date Logged & Current Version Feb. 2015 09.06.01.10 Problem: On the results grids, all combinations are checked ON and there is data for Displacements, Forces & Moments, Anchors, and Support Tabs but NOT for Code Stress Tab as shown below: Why and how to fix? Answer: Review the model and confirm: 1. Location of rigid properties: AutoPIPE does not provide code stress results for any node point location except for tees (only when Tools> Model Options> Results> Show rigid tee stress> is checked ON). Recommend reviewing the Rigid Options tab on the input grids (Review Component Data). Remove all rigid properties that do not apply (see online help to delete Rigid properties). A model that has rigid properties applied to 100% of the model will exhibit this behavior. Again, remove the rigid properties as needed. See Also Bentley AutoPIPE External Links Bentley Technical Support KnowledgeBase Bentley LEARN Server Comments or Corrections? Bentley's Technical Support Group requests that you please submit any comments you have on this Wiki article to the "Comments" area below. THANK YOU!
↧