Applies To Product(s): AutoPIPE Version(s): 2004, XM, V8i Environment: N/A Area: Reports Subarea: Original Author: Bentley Technical Support Group Date Logged & Current Version Feb. 2015 09.06.01.10 Problem: The following Error is shown in AutoPIPE's Results Summary of the Stress Summary sub-report: "Stress ratio results for this section are zero." why? Answer: There is a known issue in AutoPIPE V8i 09.4.xx.xx if User combination names are used exclusively in the Stress Summary that no results are printed, concluding 0.00 stress results with 0.00 values of Stress ratio. Thus the message "Stress ratio results for this section are zero" is printed in the sub-report. Workaround: Option #1: Upgrade to the most recent version of the program as this issue has been fixed. Option #2: Update the Stress Summary using default load-case names where possible. Example: Original Stress Summary: GR and R1 were found to be User Load Case names Revised Stress Summary to use Default Load Case names as seen below: Now the Results Summary of Stress Summary sub-report will be correctly printed: See Also Bentley AutoPIPE External Links Bentley Technical Support KnowledgeBase Bentley LEARN Server Comments or Corrections? Bentley's Technical Support Group requests that you please submit any comments you have on this Wiki article to the "Comments" area below. THANK YOU!
↧
