Applies To Product(s): AutoPIPE Version(s): 2004, XM, V8i Environment: N/A Area: Subarea: Original Author: Bentley Technical Support Group Date Logged & Current Version Jan 2015 09.06.01.10 The following enhancements have already been requested: Note: if an enhancement has not been added to the program, log an Service request for that enhancement. The more requests logged per an enhancement, the quicker the CAE development team will add that feature to the program. TFS-E138703 (CAE-CR-10654): Enable spring support bearing direction to be user-specified Description: Enable Variable and Constant springs support bearing directions to be user defined (between 'support ID' and 'Connected to' points) instead of only acting in the vertical direction regardless of graphical image. Corrected Version: TBD Workaround: Calculate and insert a Concentrated Force with the correct global X, Y, & Z directions. Recommend assign this force to the GR load-case, therefore the force will only act when the GR load-case is part of a given combination. TFS-E111597 (CAE-CR-2984): Add a Six way anchor restraint or support component Description: Add a six way restraint to the supports(DX, DY, DZ, RX, RY, RZ), this will effectively give us the C-node feature. This should include connected to point. Corrected Version: TBD See Also Bentley AutoPIPE External Links Bentley Technical Support KnowledgeBase Bentley LEARN Server Comments or Corrections? Bentley's Technical Support Group requests that you please submit any comments you have on this Wiki article to the "Comments" area below. THANK YOU!
↧