Maintenance Release 2 – AutoPIPE V8i (SELECTseries 5) (Version 9.6.2.6) Japanese is now available. Bentley AutoPIPE V8 i (SELECTseries 5) Maintenance Release 2 (v9.6.2.6) Japanese is Now Available Download from Bentley SELECTservices Online ... click here Piping Codes ASME B31.1 2014 edition now available. Import/Export Improved Isometrics drawing creation using OpenPlant Isometrics Manager. To download a PDF of the New Features and Benefits of OpenPlant Isometrics Manager, click here . To watch a recording of the AutoPIPE Isometrics Manager New Features and Benefits Webinar, click here . CII file import has been improved to connect geometry through CNODES. Analysis EN13480 Hoop allowable is now the minimum of f and fcr. If fcr is not available, the hoop allowable shall be set as time ndependent allowable stress f. A new consistency check is available when fluid density factor for an analysis set is zero. New Electric Welded Materials available for EURO2002, EURO2009 and EURO2012. User Interface Open and Archive commands are now available in the File and Save As menus. Translators PCF Translator has been improved to ignore components with OD smaller than a given threshold ignored. Documentation Use nominal thickness result model option explained in more detail in Help. Behavior of category maximums like (SUS) for multiple analysis sets explained in more detail in Help. B31.4 code material documentation updated to reflect program behavior. Help now describes how AutoPIPE displays the system to have qualified when equation 10 fails, but equation 12 and equation 13 passes for all points in the system.
↧