Applies To Product(s): AutoPIPE Vessel Version(s): V8i Environment: N/A Area: Subarea: Original Author: Bentley Technical Support Group Date Logged & Current Version 2014 33.02.02.04 Problem: Item #1: Capability to design the Flexible shell element ? Item #2: Capability to design thin bellow expansion joints as per appendix 26 of ASME section VIII divsion 1 ? Item #3: Capability to design large diameter storage tank roof with the structural members and truss or rafter arrangement? Item #4: Can Auto Pipe Vessel will design the guide support or calculate the reaction on the guide support and corresponding stress on the shell of the tall column? Item #5: Can AutoPIPE Vessel model surge analysis? Item #6: Why does AutoPIPE Vessel version 33.3.1.7 calculate foundation loads which are about 60% less than the older version 33.2.2.4? Item #7: Why does not the materials window, design tab not show the properties for the actual computed thickness in AutoPIPE Vessel? Item #8: Does AutoPIPE Vessel consider cone-shell junction as line of support for external pressure calculation? Item #9: How do I control whether or not use stiffener for external pressure? See Also Bentley AutoPIPE External Links Bentley Technical Support KnowledgeBase Bentley LEARN Server Comments or Corrections? Bentley's Technical Support Group requests that you please submit any comments you have on this Wiki article to the "Comments" area below. THANK YOU!
↧