Applies To Product(s): AutoPIPE Version(s): V8i, CONNECT; Environment: N/A Area: Reports Subarea: Original Author: Bentley Technical Support Group Date Logged & Current Version Oct. 2015 10.00.00.10 Problem: AutoPIPE result grids does not match the actual output reports, why? Example: When I open the result grid, displacements, the displacements do not match the displacements in the model. i.e. when I open Result -> Grids -> displacements these are not the same as: Result -> Displacement Answer: There is a possibility of the grids data not matching the reported data due to the process of analyzing, closing the model, re-opening the model, and reviewing results. The best approach is to delete the results before analyzing. Under Analyze> select Delete Analysis Results... Delete Analysis Results provides the opportunity to select all or individual analysis results to be deleted for the current model. After deleting analysis results, the default code and non-code combinations shall be automatically updated when "Auto" update is "on" for the code and non-code-combinations. Finally, analyze the model and review the interactive and/or reported results. See Also Reports - AutoPIPE Bentley AutoPIPE External Links Bentley Technical Support KnowledgeBase Bentley LEARN Server Comments or Corrections? Bentley's Technical Support Group requests that you please submit any comments you have on this Wiki article to the "Comments" area below. THANK YOU!
↧