AutoPIPE V8i SELECTseries 2 version 09.03.00.08 (October 19, 2010)
To view the full enhancement list for AutoPIPE v9.3.0.8, go to the link below.
http://selectservices.bentley.com/en-US/Support/Downloads+And+Updates/Readme/Bentley+AutoPIPE+V8i+%28SELECTseries+2%29.htm
Analysis
- Add option “Show Hanger Report”
Graphics
- Show node points on beams in the plot
- Improve graphics loading performance for model with large number of beams
Import/Export
- Export input grid data to MDB file
Interoperability
- Implement PipeLink to improve STAAD Integration
- Save as version 9.2 DAT files from 9.3
Libraries
- Include Czech hanger libraries Gradior and LPS
- Add JSME 2008 material library
- Update Section Libraries and use Torsion Inertia value from library when >=0.1
- Add Russian piping component library
- Add A671-CC70-22 to ASME2004 material library
- Add SA515 60, SA515 65, SA182F22 cl.1 and SA387 22 cl.1 to ASME2004 library
- Update material 1.4901 to 2007 values in Euromat library
- Add ASME II 2009 addenda material library
Modeling
- Add ability to split frame members into multiple elements
- Add 3D and 5D options to the Bend radius field
- Ability to change the default bend radius
- Option for stand double angle & double channel is to be provided in profile dlg
- Add user defined fatigue curves
- Add fluid type GAS to fluid transient fluids
- Add ASME III 2009 User Fatigue Curves
Piping Codes
- Add B31.1 2009 Addenda edition
- Update ASME B31.3 to 2008 edition
- Add CSA-Z662 piping code 2007 edition (including Offshore)
Post Processing
- Stress Summary: Show warning if any combination missing in Level C/D Rev. Dyn.
Reports
- Reduce reports width to allow for page margins
- Output Report: Indicate in report that results are outdated with model
- Print original ADLPipe Thermal Transient Analysis results file in SI units
General
- Localize input grid messages to external resource files
- Reorganize open/save and import/export options under file menu
- Online Help: Hoop or Long pressure does not work on nested combination
- Change the word 'frame' to 'beam' to make it consistent
- Add 4 new File > Import PCF menu options
- Add translator selection dialog to installer
- Installer: Install dot net framework 2.0 SP2 with program
- Move AutoPIPE program shortcuts to Bentley Engineering program folder
Security
- Restrict Nuclear Piping codes to Nuclear Edition only
System Requirements
Platform: AutoPIPE is designed to run on the following platforms/operating systems. At a minimum, your computer should meet the minimum requirements for that system; for example, the amount of RAM required by AutoPIPE depends on the RAM requirements of the environment in which you will be working:
- Windows XP Professional SP2 or later OR
- Windows Vista Business or higher
- Windows 7 Professional or higher
Hard disk space: Approximately 250 MB
Graphics Card: OpenGL 3D graphics supported
Processor: Intel Pentium III or higher
RAM: minimum 256 MB
Web Browser: Microsoft Internet Explorer 6 or greater