Wiki Page: AutoPIPE Errors

Topics under the heading should be based on Error messages found in AutoPIPE:

1. Application Error - 0xc0150002 

2. E15-13:   PXD file is needed for accessing AutoPLANT data in this model Please place PXD and PXH files in same directory as DAT file.

3. E90-21: Analysis results do not exist

4. E175-28:  Error in velocity profile specification

5. E512-65: the model cannot be opened

6. E522-33:  Cannot complete the paste operation

7. E723-23:  System is not complete for analysis purposes

8. E726-104: Zero length not allowed at beam XX

9. E732-3: Not enough clearance to fit bend xxx

10. E751-1 Tee type gt 8 or lt 1. SIF not calculated
    

11. E801-1: FATAL ERROR: Unstable System

12. E801-3:   No static load cases specified

13. E801-11: Fatal Error: no mass in the system

14. E801-135: Number of analysis nodes exceeds maximum limit of 10000 nodes

15. E951-3:   Expecting real input. Re-enter
    
    Answer:  insert a valid value into the current filed before selecting a different cell / OK button. 

16. E962-1:   File read error, please contact BENTLEY

17.