AutoPIPE XM SR1 version 09.00.00.08 (June 5, 2007) Analysis Add option to activate dampers in the wind cases Interoperability Save as version 8.6 & 6.3 DAT files from version 9.0 Export AutoPIPE model and support loads to STAAD Write Caesar cii neutral file StressISO: Add decimal control to Anchor & Support loads and stresses Save as version 8.9 DAT files from version 9.0 Modeling Add option to input numeric point names only Option to paste using actual coordinates relative to origin Automatically update point names defined in rotating equipment data Automatically update point names defined in steam relief load data Automatically update point names defined in fluid transient load data Automatically update 'connected to' point name defined in support data Reports Add minimum 2 page description option to model input listing Piping Codes Update ASME B31.1 2005 addenda code Libraries Add Haynes 556 material to ASME B31.3 library Add Al-6XN material to ASME B31.3 material library Add ductile iron A395 and A571 to ASME B31.3 material library Update Euromat library properties down to 0 degC Add China Petrochemical Spring Manufacturer Extend A790 S31803 to -20F in ASME B31.3 library Add A269 Stainless material grades TP304, TP304L, TP316, TP316L to B31.3 library Add A335-P92 to ASME B31.1 material library Add B423 & B705 NO8825 materials grades to ASME B31.3 library Add copper and socket weld schedules CT2 and SKT to component library Add B88-C12200 copper pipe material to ASME B31.3 library Add 6061, 5083 & 5154 aluminum materials to B31.3 library Add STAAD.pro structural section libraries Add Chinese GB material library Add B619 UNS N06022 Hastelloy C22 material to ASME B31.3 library Post Processing 'E827-3. Buffer Size Exceeded' for interactive code scan on large model Add user pref flag for use of automatic sustained load margin check System Requirements Platform: AutoPIPE is designed to run on the following platforms/operating systems. At a minimum, your computer should meet the minimum requirements for that system; for example, the amount of RAM required by AutoPIPE depends on the RAM requirements of the environment in which you will be working: - Windows XP Professional SP2 or later - Windows 2000 SP4 or later Hard disk space: Approximately 139 MB Video Graphics Card: OpenGL 3D graphics supported Processor: Intel Pentium-based PC 486 or higher RAM: minimum 128 MB Internet: Microsoft Internet Explorer 6 or greater See a complete collection of Readme notes at: http://communities.bentley.com/products/pipe_stress_analysis/m/pipe_stress_analysis_gallery/269426.aspx
↧