AutoPIPE V8i version 09.01.01.02 (November 10, 2008) Analysis Add an option to set rigid anchor/support stiffness values Decouple pressure stiffening in modal analysis from one in static analysis Add absolute sum method for modal summation of missing mass modes Perform multiple analyses using Analysis sets with different hot moduli Add thermal transient analysis (TTA) for ASME Class 1 Allow Ec/Eh ratio for expansion stresses to include all piping codes Add 'Analyze All' option to run user selected analyses Delete Analysis results Communication Add RSS news feed screen Graphical Interface Consolidate code and non-code combinations into one Grid interface Import /Export Standalone Translator to import PCF files e.g. SmartPlant (not included with AutoPIPE) Update Caesar translator to read v5.1 format Interoperability Save as version 9.0 DAT files from version 9.1 Add Vista Compatibility ('Works with Vista') Libraries Update Yamashita hanger data in EQUIP.LIB file with Lisega hanger data Add Chinese GD material and pipe libraries Add API5L materials to ASME B31.1 material library Add low alloy material 1.4901 to European material library Add B366, B619, B622, & B464 materials to ASME B31.3 material library Modeling Ability to combine segments and reverse segment direction Ability to split a segment into 2 segment Allow inserting and editing line numbers Add an option to renumber segments Add reference node note to Rotating equipment dialog Add 'Fillet welded' and 'Double-welded slip-on' joint end types Add actuator with COG weight to Valve Increase number of thermal and User load cases Add "Pulled" option to bend type Add Bolt weight to Flange dialog Generate multiple Xtra data Enter spring figure and size on the spring hanger support dialog Connectivity Checker for unconnected co-incident nodes Hide operating cases on the Pressure /Temperature input grid Piping codes Support for multiple code years Issue a warning for high D/T ratio for certain codes Add ASME III Class 1 Nuclear piping code Add JSME S NC1-PPC 2005 piping code (Japanese Nuclear Class 2) Update ASME B31.4-2002 piping code to 2006 edition Update ASME B31.3 piping code to 2006 edition Update ASME B31.1 to 2007 edition Post Processing Option to display continuous string dimensioning including supports Add batch processing switch to export the results MDB file 1992 + 93 Addenda NB NC ND Improvements to StressISO edition 1.0 (Show line number, JSIF and Tee data, save to DGN) Reports Allow more than 80 columns for printed reports Print the occasional k-factor in the output report Add support Tag to spring hanger report Add interpolation method and damping ratio to output report Security Add nuclear license for ASME III Class 1 piping code System Requirements Before installing AutoPIPE, be sure your computer meets the following, minimum requirements: Platform: AutoPIPE is designed to run on the following platforms/operating systems. At a minimum, your computer should meet the minimum requirements for that system; for example, the amount of RAM required by AutoPIPE depends on the RAM requirements of the environment in which you will be working: - Windows XP Professional SP2 or later - Windows 2000 SP4 or later - Windows Vista Business SP1 Hard disk space: Approximately 139 MB Video Graphics Card: OpenGL 3D graphics supported Processor: Intel Pentium-based PC 486 or higher RAM: minimum 128 MB Internet: Microsoft Internet Explorer 6 or greater See a complete collection of Readme notes at: http://communities.bentley.com/products/pipe_stress_analysis/m/pipe_stress_analysis_gallery/269426.aspx
↧