Hello Sandip, After my review it would appear that thermal expansion of the pipe against the anchors is pushing at the elbow causing the deformation. See image below, with no Support at elbow mid point. A03. Notice how A02 an A04 are pushing towards the elbow: See image below, forces exerted on anchors. due to thermal expansion: See image below, support is placed at elbow mid point. Note that the elbow mid point displacement has slid through the support and deformed to its current location. Would appear that the application is working correctly. Regards, Mike Dattilio Bentley Product Advantage Group Analyst AutoPIPE Product Line Bentley Systems, Inc. ===================================================
↧