Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: analysis Subarea: Original Author: Bentley Technical Support Group Comments, Questions, and Answers Item #1. Comment: See the following link for logged enhancements: Flange Analysis Enhancements for AutoPIPE Item #2. Question: How to perform an ANSI Check Flange Analysis with AutoPIPE How do I perform an ASME Section VIII Div 1 / 2 or Appendix XI Flange Analysis in AutoPIPE? Item #3. Question: On the Load tab, Operating Pressure field is limited to 3000 psi. Why? Answer : In AutoPIPE V8i 09.05.xx.xx and lower, there is an internal limitation of 3000 psi for data entry. A new enhancement (CAE-CR-11051) has been logged to increase this limitation. Item #4. Warning message: Warning: The required information is missing for this AutoPIPE flange analysis Item #5. Question: Flange Analysis report does not contain any results, only page headings Item #6. Question: Library data seems to be wrong: Using Tools Flange Analysis. Look-up dimensions for a 30" 150# B16.47 WN don't seem to be correct. AutoPIPE says it is 38.75" OD with 28 bolts, 1.25" Dia on a 36" bolt circle. B16.47 says it is 34.94" OD with 44 bolts, 0.75" Dia on a 33.31" bolt circle. Answer: These values are referring to ASME B16.47 - 1996. AutoPIPE use a different code year. Use one of the following methods see the code years used by the program. A. Please see the following AutoPIPE help section: Help Contents Search Tab enter "Flange Analysis Dimension Library" (include the quotes), press List Topics button, double click on the selected topic from the list provided to see more information. B. Select the help button from the Flange analysis dialog and navigate to this page using the hyperlinks. See Also Bentley AutoPIPE External Links Bentley Technical Support KnowledgeBase Bentley LEARN Server Comments or Corrections? Bentley's Technical Support Group requests that you please submit any comments you have on this Wiki article to the "Comments" area below. THANK YOU!
↧