Applies To Product(s): AutoPIPE Version(s): 2004, XM, V8i Area: Printing Original Author: Bentley Technical Support Group Date Logged & Current Version Feb. 2015 09.06.01.10 Problem: How to print parts of the model highlighted red color only in the AutoPIPE output report? Solution: With a model open in AutoPIPE, analyze the model. Afterwards, press Select> select node points, segment, components, etc. as required in the model, press Results> Output Report> enable (check ON) "Limit results to highlighted points" (see online help for details on this option), continue with enabling additional sub reports as need, and press OK button. Note: you will need to select the over stress points shown as red in the code compliance color, consider using the Results> Filter command in addition to the Select command for highlighting parts of the model. See Also Printing Bentley AutoPIPE
↧