Applies To Product(s): AutoPIPE Version(s): 2004, XM, V8i Environment: N/A Area: Subarea: Original Author: Bentley Technical Support Group Date Logged & Current Version Aug. 2015 09.06.02.06 Problem: Performing an AutoPIPE ANSI flange analysis, a specific flange always Fails to be analyze, why? Answer: First inspection of the ANSI Flange analysis information appears to be correct: Upon further investigation, the node point has distributed load and AutoPIPE Xtra Data. There is a known issue related to these setting when trying to perform a Flange analysis (documented under TFS-263628). Workaround: 1. Perform one of the following A. Insert flange first and then insert any other extra data item. OR B. Delete all extra data items from point. C. Insert flange D. Insert the deleted extra data items back 2. Uncheck and re-check Analyze box for the respective flange on the Analyze tab of the Flange Analysis dialog screen. See Also Bentley AutoPIPE External Links Bentley Technical Support KnowledgeBase Bentley LEARN Server Comments or Corrections? Bentley's Technical Support Group requests that you please submit any comments you have on this Wiki article to the "Comments" area below. THANK YOU!
↧