| Applies To | |||
| Product(s): | AutoPIPE, | ||
| Version(s): | 2004, XM, & V8i | ||
| Environment: | N/A | ||
| Area: | combinations | ||
| Subarea: | |||
| Original Author: | Bentley Technical Support Group | ||
Comments, Questions, and Answers about No-code combinations in AutoPIPE
Item #1:
How to set up a non-code combination to print 0.3*gravity when axial displacement at a support exceeds 1/8" in thermal load case?
Answer: We apologize for the inconvenience, but there is no mechanism to have a combination set up based on a value result in another combination.
You can filter the output report based on values (see Results> Filter Criteria) , but you would still need to manually create the combination that can be enabled to be printed or not (see Tools> Combination> non-code tab> print option).
See Also
External Links
Bentley Technical Support KnowledgeBase
Comments or Corrections?
Bentley's Technical Support Group requests that you please submit any comments you have on this Wiki article to
the "Comments" area below. THANK YOU!