Hello Vishal, AutoPIPE appears to be working correctly. Based on the model you had sent (which does not match the above image reference), the results of support displacement per operating conditions are all 0.00 for Global Z (vertical) Axis, except for support B24 which is on a vertical pipe that is sliding axially through the support: Also note that the support loads are +ve for at node point B23, however see that the displacement is 0.00 in the vertical direction for those respective load cases. Remember that the animated displacement is an overly exaggerated depiction of the pipe movement. also, viewing the displacement from one angle may give the impression that the pipe is moving in a direction that is not entirely correct until the view is rotated to see clearly how the movement is occurring. You may prefer to turn on "Deflected Plot Preferences" see AutoPIPE help for details on this feature. Regards, Mike Dattilio Bentley Product Advantage Group Analyst AutoPIPE Product Line Bentley Systems, Inc. ===================================================
↧