Wiki Page: z> Technical Support - AutoPIPE
What is BentleyTSG? Bentley Technical Support Group (TSG) is dedicated to assisting our SELECT subscribers with technical problems encountered in Bentley applications. Technical problems include...
View ArticleForum Post: SIG Virtual Workshop: AutoPIPE - April 13, 2017
Join Bentley's Jessica Alegre online Thursday, April 13, at 1 p.m. EST for the next AutoPIPE Special Interest Group (SIG) workshop. Register today ! Don’t miss this AutoPIPE Special Interest Group...
View ArticleWiki Page: 03. How to correctly model a reducer mounted to the branch of a...
Applies To Product(s): AutoPIPE Version(s): ALL; Environment: N/A Area: Modeling Original Author: Bentley Technical Support Group Date Logged & Current Version Nov. 2016 10.01.00.09 Problem: How to...
View ArticleWiki Page: 24. "Graphic" Enhancements and Defects for AutoPIPE
Applies To Product(s): AutoPIPE Version(s): ALL; Environment: N/A Area: Original Author: Bentley Technical Support Group Date Logged & Current Version Oct. 2016 10.01.00.09 The following...
View ArticleForum Post: RE: Autopipe support displacement
Hello Sandip, I apologize on my part, as I do not understand where you had posted your model too. Please provide exact link to model location. Regards, Mike Dattilio Bentley Product Advantage Group...
View ArticleForum Post: RE: Support movement inspite of rigid defn
Hello Vishal, AutoPIPE appears to be working correctly. Based on the model you had sent (which does not match the above image reference), the results of support displacement per operating conditions...
View ArticleForum Post: RE: Doubts in viewing code stresses
Hello Vishal, Correct the floating interactive review dialog assumes that the user would only be interested in the MAX values for each category of code combinations and would not be interested in...
View ArticleForum Post: RE: Node numbering direction
Hello Dipesh, To my knowledge, No the node numbers does not have any bearing on the results. the largest contributing factors are specific model settings (press, Temp, pipe properties, code selection,...
View ArticleForum Post: RE: Code Stress Result
Anthony, There are few known issue related to bends and SIF values in our older editions that have been fixed in newer versions of the application. Suggest that you open your model in the most recent...
View ArticleWiki Page: 23. What is the value of ASCE 7 Wind load setting "Cf" when value...
Applies To Product(s): AutoPIPE, Version(s): ALL Environment: N/A Area: Load Original Author: Bentley Technical Support Group Problem: What is the value of ASCE 7 Wind load setting "Cf" when value is...
View ArticleWiki Page: 09. Should the Wind Shape Factor Multiplier be 1 or 0.7 when using...
Applies To Product(s): AutoPIPE, Version(s): ALL Environment: N/A Area: Load Original Author: Bentley Technical Support Group Problem: Should the Wind Shape Factor Multiplier be 1 or 0.7 when using the...
View ArticleWiki Page: 05. How is the ground elevation determined for a Wind load case in...
Applies To Product(s): AutoPIPE, Version(s): ALL Environment: N/A Area: Load Original Author: Bentley Technical Support Group Problem: How can the pipe movement be greater than the support gap setting...
View ArticleWiki Page: 06. How to input a Wind profile using Wind Velocity instead of...
Applies To Product(s): AutoPIPE, Version(s): ALL Environment: N/A Area: Load Original Author: Bentley Technical Support Group Problem: How can the pipe movement be greater than the support gap setting...
View ArticleWiki Page: "Displacement Scale" setting in AutoPIPE
Comments, Questions, and Answers related to Tools>Model Options> Results> "Displacement Scale" setting in AutoPIPE: Item #1 Displacement Scale was found to be blank Why and how to fix? Answer...
View ArticleWiki Page: 05. Thermal loading does not seem to be applied in the axial...
Applies To Product(s): AutoPIPE, Version(s): All Environment: N/A Area: Settings Original Author: Bentley Technical Support Group Problem: In my simple model with an Rigid Anchor - Pipe - Rigid Anchor,...
View ArticleWiki Page: "Use corroded thickness in all analyses" model options, edit...
Applies To Product(s): AutoPIPE Version(s): ALL; Environment: N/A Area: Settings Original Author: Bentley Technical Support Group Date Logged & Current Version March. 2017 11.00.00.22 Problem: How...
View ArticleWiki Page: "Options to Renumber" model option, edit settings in an AutoPIPE...
Applies To Product(s): AutoPIPE, Version(s): ALL Environment: N/A Area: Settings Original Author: Bentley Technical Support Group Problem: What options are available to renumber an AutoPIPE model?...
View ArticleWiki Page: "Distance L/D from flange/valve to bend" model option, edit...
Item #1: Can the "Distance L/D from flange/valve to bend" setting be turned OFF in an AutoPIPE model? See Also Tools> Model Options> Edit settings Bentley AutoPIPE
View ArticleWiki Page: 01. Can the "Distance L/D from flange/valve to bend" setting be...
Applies To Product(s): AutoPIPE Version(s): ALL Environment: N/A Area: Settings Original Author: Bentley Technical Support Group Date Logged & Current Version July 2015 09.06.02.06 Problem: Can the...
View ArticleWiki Page: "Include Bourdon rotational effect" model option, edit settings in...
Applies To Product(s): AutoPIPE, Version(s): ALL Environment: N/A Area: Modeling Original Author: Bentley Technical Support Group Problem: What does the following Tools> Model Options> Edit>...
View Article