Wiki Page: "Mass points per span" model options, edit settings for an...
Comments, Questions, and Answers for "Mass points per span" setting Item #1: Is there a report that indicates the final spacing of Mass points that are auto generated? See Also Tools> Model...
View ArticleWiki Page: 01. Is there a report that indicates the final spacing of Mass...
Applies To Product(s): AutoPIPE Version(s): ALL Environment: N/A Area: Modeling Original Author: Bentley Technical Support Group Date Logged & Current Version Mar. 2015 09.06.01.10 Problem: Is...
View ArticleForum Post: RE: Autopipe support displacement
Hello Mike, I uploaded the files in the following link. Please inform if I need to upload it somewhere else. If yes, please give me that link. Regards, Sandip Dey...
View ArticleWiki Page: 02-04. Tools> Model Options> Edit Model Options settings in AutoPIPE
Topics here are based on all the program settings found under Tools> Model Options> Edit: Distance L/D from flange/valve to bend Include Bourdon rotational effect Mass points per span Options to...
View ArticleForum Post: RE: Support movement inspite of rigid defn
Yes Mike, I got the same results but my doubt is for support lets say at B23 and B24 suppport, pipe can move in linear direction agree but not support. See B23 support it shows 3.38mm in GY and B24...
View ArticleForum Post: RE: Doubts in viewing code stresses
But I would like to see if this request gets implimented in coming versions. Any way thanks Mike for the clarification.
View ArticleForum Post: RE: Node numbering direction
Thank you very much for clearing that up. I was analyzing a line from the tank outlet to pump inlet and tried reversing the order which gave me different result. May be the gaps between the guides also...
View ArticleForum Post: Hi I would like to know if you can work in AutoPipe with a...
Hi I would like to know if you can work in AutoPipe with a AutoCad background. I intent using AutoPipe only for the pipework between structures eg treatment plants. I do not want to us it as a design...
View ArticleForum Post: RE: B31.8 - Corroded Thickness used in Longitudinal Stress due to...
Hello Robert, Unfortunately, "Use Corroded Thickness in All Analyses" setting may change the analysis results, see WIKI here . Regards, Mike Dattilio Bentley Product Advantage Group Analyst AutoPIPE...
View ArticleForum Post: RE: Support movement inspite of rigid defn
Hello Vishal, Correct, because the support is graphically attached to the node point (ex. B23), as the Node point moves in the animation so does the support. Regardless, always refer to the grids or...
View ArticleForum Post: RE: Hi I would like to know if you can work in AutoPipe with a...
Hello Roelof, At this time AutoPIPE is able to import information it does not have a feature to overlay, xreference, super impose an image in the background of a model. This suggestion has already be...
View ArticleForum Post: RE: Autopipe support displacement
Hello Sandip, Ok I understand where your model is located. One more question, what is the name of your file? There are a number of files in this folder. Regards, Mike Dattilio Bentley Product Advantage...
View ArticleForum Post: RE: Multiple cases simultaneously for Time history vs. several...
Hello Mlynch, The most important requirement in modeling a fluid transient with multiple branch connections would be confirming the start time of each branch transient is correct. Regards, Mike...
View ArticleForum Post: RE: modal analysis bending and force output
Hello Chris, This would be tough to diagnose without a model. Please post your model here or log a Bentley Service Request. Regards, Mike Dattilio Bentley Product Advantage Group Analyst AutoPIPE...
View ArticleWiki Page: 07. What are the Participation Factors and the Captured Modal Mass...
Applies To Product(s): AutoPIPE Version(s): ALL; Environment: N/A Area: Original Author: Bentley Technical Support Group Date Logged & Current Version Feb. 2017 11.00.00.22 Problem: What are the...
View ArticleForum Post: RE: Captured modal mass in Fluid Transient analysis
Hello Fukun, See following WIKI locations for information on modal analysis and Frequency sub-report: 1. Dynamic "Modal" Analysis 2. "Frequencies" sub-report select: Item #1: What options are available...
View ArticleForum Post: Terms related to user defined rotating equipment
Hello forum, In user defined rotary equipment, What is the meaning and significance of following terms: 1) Reference point 2) Resolution point 3) Resolution point offset 4) Pedestral axis I went...
View ArticleForum Post: RE: Import Coordinate Data into AutoPIPE - Importing an Excel File
Hello Shahram, Would it be possible to share the excel file and model that we can use to review this issue? Please post files here or ask that you log a Bentley Service request and send the files for...
View ArticleForum Post: RE: A335 P36 CL1 code allowable stress incorrect
Hello Zhixin, Yes, if possible please post AutoPIPE model or log a Bentley Service request and send for review. Thanks for your time, Regards, Mike Dattilio Bentley Product Advantage Group Analyst...
View ArticleForum Post: RE: All elements of the model not visible in the flex table
Hello Zaman, What application and version are you using? Can you post the model and/or screen shots? Thanks for your efforts. Regards, Mike Dattilio Bentley Product Advantage Group Analyst AutoPIPE...
View Article