Topics under the heading should be based on Error messages found in AutoPIPE: Application Error - 0xc0150002 E15-13: PXD file is needed for accessing AutoPLANT data in this model Please place PXD and PXH files in same directory as DAT file. E90-21: Analysis results do not exist E175-28: Error in velocity profile specification E512-65: the model cannot be opened E522-33: Cannot complete the paste operation E723-23: System is not complete for analysis purposes E726-104: Zero length not allowed at beam XX E732-3: Not enough clearance to fit bend xxx E751-1 Tee type gt 8 or lt 1. SIF not calculated E801-1: FATAL ERROR: Unstable System E801-3: No static load cases specified E801-4: Zero length element E801-5: Zero Element Stiffness in AutoPIPE E801-11: Fatal Error: no mass in the system E801-12: Cannot find next frequency E801-135: Number of analysis nodes exceeds maximum limit of 10000 nodes E951-3: Expecting real input. Re-enter Answer: insert a valid value into the current filed before selecting a different cell / OK button. E962-1: File read error, please contact BENTLEY "Root Element Is Missing" message displayed in AutoPIPE
↧