Applies To Product(s): AutoPIPE Version(s): ALL; Area: Stress Isometric Date Logged & Current Version Feb. 2018 11.02.00.10 Problem: When trying to create a Stress isometric in AutoPIPE the following message appears: "Openplantisometricmanager" stopped working" Why and how to avoid this? Solution: There can be any number of reasons why this issue would appear. Review each of the following scenarios to determine if one or more may apply: Scenario #1: Unit conversion Problem was with some unit conversion issue in Support Boomlables which maybe present in .L00 file. Workaround: Open the model Press Save Stress Isometric and select the name and location of the drawing On “ AutoPIPE Isometric Manager Options ” dialog, Press “ Settings ” button On Settings Dialog go to “ Dimensioning/Text ” tab and change Eng/Metric Dims to “ mm Pipeline Bores / mm linear dimensions ” and press OK Then press OK on main dialog to generate Isometric. Scenario #2: Automatic split Model had a large amount of information that was condensed down into one drawing. Workaround: Open the model Press " Save Stress Isometric " and select the name and location of the drawing On “ AutoPIPE Isometric Manager Options ” dialog, Check “ Automatic Split ” option, to be enabled Press Settings button. On Settings Dialog go to “ Automatic split ” tab and adjust the min and max numbers as desired and press OK Then press OK on main dialog to generate Isometric. See Also "Bentley Systems, Inc" Messages Bentley AutoPIPE
↧