Wiki Page: Readme Release Notes for AutoPIPE Vessel
Applies To Product(s): AutoPIPE Vessel Version(s): V8i Environment: N/A Area: Release Notes Subarea: Original Author: Bentley Technical Support Group See the following links for details of each...
View ArticleWiki Page: Technical information about AutoPIPE Vessel (previously known as...
Applies To Product(s): AutoPIPE Vessel Version(s): V8i Environment: N/A Area: General Subarea: Original Author: Bentley Technical Support Group Technical information about AutoPIPE Vessel (previously...
View ArticleForum Post: RE: ASME B31.3 (2012) Expansion stress allowable
Hi Mike, I did the same exercise as you did using the WALKTHRU.DAT file. Changed the pressure/temperature, ticked Appendix P and material to API5L-X60. And the allowables are not the same. See...
View ArticleForum Post: RE: ASME B31.3 (2012) Expansion stress allowable
Attached the 2010 version results
View ArticleForum Post: RE: ASME B31.3 (2012) Expansion stress allowable
Hello leniine666, In the future please provide more details posting an issue, as this issue only occurred when using metric unit files but is OK when using English unit files, as I had originally...
View ArticleWiki Page: Microsoft Visual C++ Runtime Library issue in AutoPIPE
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Crashed Subarea: Original Author: Bentley Technical Support Group Problem: When starting AutoPIPE, the following...
View ArticleWiki Page: Warnings, Errors, Crashed, Confirm - AutoPIPE
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Subarea: Original Author: Bentley Technical Support Group Application Warnings Messages Application Error...
View ArticleForum Post: How to model Direct Buried preinsulated bonded pipe?
Sectional view of the buried pipe as shown in the picture below, It steel pipes, thermal insulation and outer protective layer are simulated together.And the stiffness of the three considered. Design...
View ArticleForum Post: Using DNV OS F101 2012 , No code check preformed for some cases
Anybody familiar with using the DNV code in Autopipe , I have some code checks not preformed and I dont know whats the problem, also some stresses are very low i dont know if it is realistic.
View ArticleComment on DNV Piping Code Calculation Issues in AutoPIPE
I am worried about how the DNV code works in Autopipe , I was surprised to read that SIF is not included in the ASD checks! Also if we are using the DNV code then we need also to use the DNV-RP-C203...
View ArticleBlog Post: Bentley AutoPIPE V8i SELECTseries 5 (v09.06.00.19) – English
Bentley AutoPIPE V8i is a stand-alone, engineering application for the calculation of piping stresses, fatigue stresses, fluid transient, bowing or thermal transient analysis, flange or pipe support...
View ArticleWiki Page: EN13480 Piping Code Calculation Issues
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Subarea: Original Author: Bentley Technical Support Group Comments, Questions, and Answers about EN 13480 Piping...
View ArticleWiki Page: DNV Piping Code Calculation Issues in AutoPIPE
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Calculations Subarea: Original Author: Bentley Technical Support Group Comments, Questions, and Answers about...
View ArticleForum Post: RE: Using DNV OS F101 2012 , No code check preformed for some cases
You pls specify what problem with DNV code. There is topic as link below maybe help you for bursting condition: communities.bentley.com/.../95890.aspx
View ArticleForum Post: RE: Using DNV OS F101 2012 , No code check preformed for some cases
Hello Ayman79, Did the reply from JackBP, link provided, answer your question? Regards, Mike Dattilio Bentley Technical Support Analyst Web: selectservices.bentley.com Create your Service Request...
View ArticleForum Post: RE: How to model Direct Buried preinsulated bonded pipe?
Hello Jackzwt, AutoPIPE can model a pipe lining weight, the carrier pipe, and pipe insulation weight, pipe cladding weight with the overall diameter applied correctly for wind / soil loading. However,...
View ArticleWiki Page: Rotating Equipment - Modeling in AutoPIPE
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Modeling Subarea: Original Author: Bentley Technical Support Group Comments, Questions, and Answers on this...
View ArticleWiki Page: Model Different Types of PIPING Components - AutoPIPE
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Modeling Subarea: Original Author: Bentley Technical Support Group Attention: Please see the following AutoPIPE...
View ArticleWiki Page: ASME B31.4 Piping Code Calcualtion Issues
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Calculations Subarea: Original Author: Bentley Technical Support Group Comment, Questions, and Answers about...
View ArticleWiki Page: Installing AutoPIPE V8i 09.06.00.15
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Install Subarea: Original Author: Bentley Technical Support Group Problem: How to Download, Install, License,...
View Article