Forum Post: RE: B31.3 default allowables
Hi Mike, Sorry, I may not have phrased it the correct way. I meant how each allowable is allocated to each default load case combination, especially the "Max P" load case. It looks like the allowable...
View ArticleForum Post: RE: B31.3 default allowables
Hello Lenie666, Please see the following AutoPIPE help section: Help Contents Contents Tab Reference Information Code Compliance Calculations ASME B31.3 (2012) Hoop Stress. The allowable hoop...
View ArticleForum Post: RE: B31.3 default allowables
Hi Mike, Thanks for that, I had missed it the first time. Would you have a reference pointing to the code?
View ArticleForum Post: RE: Autopipe calcuate piping pressure thrust and pressure...
This question may already have been answered in another post, however, AutoPIPE uses a more accurate thick wall formula for pressure extension calculations for which pressure extension is calculated...
View ArticleForum Post: RE: Pressure Extension
I second KRinawi (always)... Some details of how AutoPIPE calculates pressure extension: AutoPIPE uses a more accurate thick wall formula for pressure extension calculations for which pressure...
View ArticleWiki Page: DNV Piping Code Calculation Issues in AutoPIPE
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Calculations Subarea: Original Author: Bentley Technical Support Group Comments, Questions, and Answers about...
View ArticleWiki Page: AutoPIPE Errors
Topics under the heading should be based on Error messages found in AutoPIPE: Application Error - 0xc0150002 AutoPIPE Preview Handler error on installation E15-13: PXD file is needed for...
View ArticleWiki Page: E829-1: Incorrect model size in file Static analysis results will...
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Error Subarea: Original Author: Bentley Technical Support Group Problem: The following error occurs when I...
View ArticleForum Post: ASME B31.3 (2012) Expansion stress allowable
I have run the same model for both ASME B31.3 (2012) and ASME B31.3 (2010), using appendix P. The ASME B31.3 (2012) expansion stress allowable is different from the ASME B31.3 (2010) expansion stress...
View ArticleForum Post: RE: ASME B31.3 (2012) Expansion stress allowable
Hello Leinee666, Using the example model Walkthru.DAT and only changing the piping code year and material from CS to A53-a, all the allowables in the entire model were found to be the same. Suggest...
View ArticleWiki Page: AutoPIPE crashes, Faulting module name: ntdll.dll
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Crashes Subarea: Original Author: Bentley Technical Support Group Problem: AutoPIPE crashes with the following...
View ArticleWiki Page: Application Crashed - AutoPIPE
"A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." Program periodically freezes, toolbars disappear, and application...
View ArticleWiki Page: W2018-11, W2018-12, W2018-16: Not authorized for ???? edition,...
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Licensing Subarea: Original Author: Bentley Technical Support Group Problem: The following appears when starting...
View ArticleWiki Page: AutoPIPE Warnings
Topics under the heading should be based on Warnings found in AutoPIPE: W31-86: No allowable stresses are available for the selected material in the material library W41-27: Parameters are outside...
View ArticleWiki Page: After being successfully activated, AutoPIPE reverts to Demo Mode
Applies To Product(s): AutoPIPE Nuclear Version(s): 09.06.00.15 Environment: Windows 7, Windows 8 Area: N/A Subarea: N/A Original Author: Marco Salino, Bentley Technical...
View ArticleWiki Page: Licensing - AutoPIPE
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Licensing Subarea: Original Author: Bentley Technical Support Group Comments, Questions, and Answers about...
View ArticleBlog Post: Bentley AutoPIPE Vessel V8i Powered by Microprotol(v33.02.01.08)...
Bentley AutoPIPE Vessel V8i is a stand-alone, Engineering application for the comprehensive calculation of pressure vessels, heat exchangers, tanks, and air coolers to ASME, European, French CODAP,...
View ArticleWiki Page: AutoPIPE V8i SS4 09.05.01.05 - Russian
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Subarea: Original Author: Bentley Technical Support Group AutoPIPE V8i SS4 09.05.01.05 , released 4/2/2014...
View ArticleWiki Page: Dynamic Analysis - Time History load case in AutoPIPE
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Dynamic Analysis Subarea: Original Author: Bentley Technical Support Group Comments, Questions, and Answers Item...
View ArticleWiki Page: AutoPIPE Vessel V8i v.33.02.01.08 Software Release Notes
The following Release Notes are provided as a reference by Bentley's Technical Support Group. Version Number: 33.02.01.08 Date Posted: 4/1/2014 11:56:13 AM Application...
View Article