Forum Post: RE: EN 13480 - code edition
Hello, This enhancement CAE-CR-11099 will be added to AutoPIPE V8i 09.06.01.xx and higher. Regards, Mike Dattilio Bentley TSG Support Analyst ===================================================
View ArticleForum Post: How to copy from Excel back into AutoPIPE?
I thought a lot of people might have this issue, but I couldn't find anything about it in the forums, so here goes: I have a bunch of concentrated forces (a few hundred), all of the same magnitude,...
View ArticleForum Post: RE: How to copy from Excel back into AutoPIPE?
We create cross-country piping models by way of data held in an Excel sheet, then using VBA macros to create NTL files. You can export your AutoPIPE model to an NTL file which is just an ASCII text...
View ArticleForum Post: RE: Time History Analysis
Hello Mike, Could I ask a quick question? I have combined a Time History load with other static load. The dynamic page in the post-processing mode - does it give the results about the TH load alone?...
View ArticleBlog Post: New Release of AutoPIPE SS5 Maintenance Release 1
We are pleased to announce the commercial release of AutoPIPE SS5 Maintenance Release 1. This new release provides new features, critical code updates, and enhanced product interoperability. To learn...
View ArticleBlog Post: Benefits of Using AutoPIPE for Piping Design with Fiberglass FRP...
The Benefits of Using AutoPIPE for Piping Design with Fiberglass FRP 16 October 2014 10:30 IST | 13:00 AWST | 15:00 AEST There is a global growth in design of low temperature and pressure piping...
View ArticleBlog Post: New AutoPIPE Webinar this week: The Benefits of Using AutoPIPE for...
There is a global growth in design of low temperature and pressure piping systems using FRP/GRP materials even for Nuclear plants. This Webinar will discuss important design considerations for material...
View ArticleForum Post: Maintenance Release – AutoPIPE V8i (SELECTseries 5) (Version...
Maintenance Release – AutoPIPE V8i (SELECTseries 5) (Version 9.6.1) is now available. Bentley AutoPIPE V8i (SELECTseries 5) (Commercial Release – v09.06.01) is Now Available with 15 New Features!...
View ArticleForum Post: AutoPIPE's Modal Analysis Compared with Caesar II
Check out the comparison of Modal frequencies between Caesar 5.3 and AutoPIPE v9.4.1 http://communities.bentley.com/products/pipe_stress_analysis/m/pipe_stress_analysis_gallery/270284
View ArticleFile: Comparison Modal analysis Caesar II Vs AutoPIPE
For simple models Caesar is missing many natural frequencies even using its consistent mass method. The frequencies it does report are not always accurate.
View ArticleWiki Page: Model Fluid Density in AutoPIPE
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Modeling Subarea: Original Author: Bentley Technical Support Group Comments, Questions, and Answers: Item #1: How...
View ArticleWiki Page: AutoPIPE ATS Troubleshooting Q & A
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: AutoPIPE ATS Subarea: Original Author: Bentley Technical Support Group Questions and Answers Item #1 I was...
View ArticleWiki Page: AutoPIPE ATS download / install instructions
Applies To Product(s): AutoPIPE ATS Version(s): 2004, XM, & V8i Environment: N/A Area: Installation Subarea: Original Author: Bentley Technical Support Group Problem How to download and install...
View ArticleWiki Page: Bentley AutoPIPE Automatic Test Set (ATS)
The Bentley AutoPIPE Acceptance Test Set (ATS) provides the user with a recommended procedure for validating the integrity of the installed AutoPIPE v09.05.01.02 program. Since software validation and...
View ArticleWiki Page: AutoPIPE & STAAD.Pro Error Reports
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Error / Defect Subarea: Original Author: Bentley Technical Support Group Problem: AutoPIPE & STAAD.Pro Error...
View ArticleWiki Page: AutoPIPE Enhancements Requests
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Enhancement Subarea: Original Author: Bentley Technical Support Group Problem: What enhancement request have...
View Article