Forum Post: Interaction between Autopipe and STAAD PRO
Hi, Is there a clear procedure explaining how to EXPORT models done in STAAD towards AUTOPIPE. Which is the best practice , creating the frame beams in autopipe or STAAD?
View ArticleForum Post: RE: Interaction between Autopipe and STAAD PRO
Hello Ayman79, AutoPIPE is shipped with multiple tutorials both inside the Online help and also PDF files located in the Program folder\Documents. In this case there is a PDF file called...
View ArticleWiki Page: Loads and Load Sets - AutoPIPE
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Loads Subarea: Original Author: Bentley Technical Support Group Comments, Questions, and Answers About Loads and...
View ArticleWiki Page: "Pressure" - AutoPIPE load case
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Loads Subarea: Original Author: Bentley Technical Support Group Comments, Questions, and Answers Item #1: How to...
View ArticleWiki Page: Modeling Approaches in AutoPIPE
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Modeling Subarea: Original Author: Bentley Technical Support Group AutoPIPE's Online help "Modeling Approaches"...
View ArticleWiki Page: Modeling Approaches, Tips, Technique for Flexible Joint Piping...
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Modeling Subarea: Original Author: Bentley Technical Support Group Attention: Please see the following AutoPIPE...
View ArticleForum Post: RE: Correct model of expansion joint
Hello Dudiw, The only way to be sure which option to choose is to contact the Manufacture who published the catalog and ask them to define "Effective Area". Then see if it matched the definition...
View ArticleWiki Page: Safety Factors in AutoPIPE
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Subarea: Original Author: Bentley Technical Support Group Problem: What safety factors are used in AutoPIPE for...
View ArticleWiki Page: "Code Comb" tab Questions
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Subarea: Original Author: Bentley Technical Support Group The "Code Compliance" grid displays the combination set...
View ArticleWiki Page: Modeling Support - AutoPIPE
Select Support from the Insert or Modify menu to display the Support dialog. A support may be added at any point in the piping (or framing) system, and more than one support is allowed at a point. Once...
View ArticleForum Post: AutoPIPE Vessel . ASME U-Stamp program verification.
Are there any tests for AutoPIPE Vessel to download in order to demonstrate U-Stamp inspectors that the program does reliable calculations? I specially refer tubesheet and flanges calculations. Has...
View ArticleForum Post: RE: AutoPIPE Vessel . ASME U-Stamp program verification.
Hello Marcos, AutoPIPE Vessel has example models under the following folder that can be analyzed and produce a report for the inspectors: C:\Users\Public\Documents\AutoPIPE Vessel\Examples These...
View ArticleWiki Page: W726-6: Near zero length element at point XXX
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Warning Message Subarea: Original Author: Bentley Technical Support Group Problem: The following is displayed in...
View ArticleWiki Page: W726-170:The tee at point XXX has only two legs defined which may...
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Warning Message Subarea: Original Author: Bentley Technical Support Group Problem: The following is displayed in...
View ArticleWiki Page: W726-8: Kink in straight run of 179.9 deg at point XXX
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Warning Message Subarea: Original Author: Bentley Technical Support Group Problem The following is displayed in...
View ArticleWiki Page: W726-7: Pipe diameter change without a reducer at point XXX
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Warning Message Subarea: Original Author: Bentley Technical Support Group Problem: The following is displayed in...
View ArticleWiki Page: W727-3: Temperature is outside the range specified by the code for...
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Warning Message Subarea: Original Author: Bentley Technical Support Group Problem The following appears when...
View ArticleWiki Page: W726-8: Kink in straight run of 90.0 deg at point XXX
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Warning Message Subarea: Original Author: Bentley Technical Support Group Problem: The following is displayed in...
View ArticleWiki Page: z> Attend a live meeting with an AutoPIPE Analyst
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Technical Support Subarea: Original Author: Bentley Technical Support Group Attend a live meeting with an...
View ArticleWiki Page: Bentley AutoPIPE Nozzle Release Notes
Applies To Product(s): AutoPIPE Nozzle Version(s): V8i Environment: N/A Area: Subarea: Original Author: Bentley Technical Support Group The following Release Notes are provided as a reference by...
View Article