Clik here to view.
Wiki Page: W726-93: Zero weight flange found at point XXX
Applies To Product(s):AutoPIPE,Version(s):2004, XM, & V8iEnvironment: N/AArea: WarningsSubarea: Original Author:Bentley Technical Support GroupProblem:The following is displayed in the model...
View ArticleClik here to view.
Wiki Page: W726-94: Zero weight valve found at point
Applies To Product(s):AutoPIPE,Version(s):2004, XM, & V8iEnvironment: N/AArea: WarningsSubarea: Original Author:Bentley Technical Support GroupProblem:The following is displayed in the model...
View ArticleClik here to view.
Wiki Page: AutoPIPE Warnings
Topics under the heading should be based on Warnings found in AutoPIPE:W726-2: Gap orientation has changed for guide at point XXX W726-6: Near zero length element at point XXXW726-7: Pipe diameter...
View ArticleFile: AutoPIPE Vessel Fundamental - FAQ
AutoPIPE Vessel Fundamental - Frequently Asked Questions (FAQ)
View ArticleClik here to view.
Wiki Page: AutoPIPE Vessel Fundamental - FAQ
Applies To AutoPIPE VesselProduct(s):AutoPIPE VesselVersion(s):allEnvironment: N/AArea: FAQSubarea: Original Author:Bentley Technical Support Group AutoPIPE Vessel Fundamental - FAQ AutoPIPE Vessel...
View ArticleClik here to view.
Wiki Page: "Code Comb" tab Questions
Applies To Product(s):AutoPIPE,Version(s):2004, XM, & V8iEnvironment: N/AArea: Subarea: Original Author:Bentley Technical Support GroupThe "Code Compliance" grid displays the combination set...
View ArticleClik here to view.
Wiki Page: Modeling Approaches, Tips, Technique for Flanges Piping Components...
Applies To Product(s):AutoPIPE,Version(s):2004, XM, & V8iEnvironment: N/AArea: ModelingSubarea: Original Author:Bentley Technical Support GroupAttention: Please see the following AutoPIPE help...
View ArticleForum Post: Re: How to Model a Riser Hanger Flange
Hello Oscar, From the website you sent me. I was able to see the folloing bit of information:Anchor flanges are considered to be buried within concrete and hanger flanges are considered to be bolted to...
View ArticleForum Post: Re: Thermal range
Hello GP, Please see the folowing WIKI site:communities.bentley.com/.../8392.aspxItem #6. I think this is what you are asking about to create combinations with different thermal ranges. Thanks for your...
View ArticleForum Post: Re: Segment's integration
Hello Mykola, I would suggest that you review the following web page:communities.bentley.com/.../7372.aspx. The short answer is to see the following command list:Edit> Segment> See onlin ehlp to...
View ArticleClik here to view.
Wiki Page: Dynamic Analysis Enhancements for AutoPIPE
Applies To Product(s):AutoPIPE,Version(s):2004, XM, & V8iEnvironment: EnhancementsArea: Subarea: Original Author:Bentley Technical Support GroupThe following Dynamic Analsyis enhancements have been...
View ArticleClik here to view.
Wiki Page: Can AutoPIPE V8i Import / Export Bentley HAMMER loads?
Applies To Product(s):AutoPIPE,Version(s):2004, XM, & V8iEnvironment: N/AArea: importSubarea: Original Author:Bentley Technical Support GroupProblem:Can AutoPIPE V8i Import / Export Bentley HAMMER...
View ArticleClik here to view.
Wiki Page: Import and Export - AutoPIPE
Topics under the heading should be based on:All translator and integration issues, including PipeLink, Caesar, OpenPlant, MDB, NTL etc. What file formats can AutoPIPE Import/Export? Import...
View ArticleClik here to view.
Wiki Page: Licensing - AutoPIPE
Topics under the heading should be based on:Licensing issuesBe sure to review the following document installed with AutoPIPE: C:\ Bentley\ AutoPIPE V8i SELECTseries\ Quickstart_AutoPIPE.pdf...
View ArticleClik here to view.
Wiki Page: W2018-11, W2018-12, W2018-16: Not authorized for ???? edition
Applies To Product(s):AutoPIPE,Version(s):2004, XM, & V8iEnvironment: N/AArea: LicensingSubarea: Original Author:Bentley Technical Support GroupProblem:The following appears when starting...
View ArticleClik here to view.
Wiki Page: The load case did not converge. Do you wish to continue iterating?
Applies To Product(s):AutoPIPE,Version(s):2004, XM, & V8iEnvironment: N/AArea: Confirm MessageSubarea: Original Author:Bentley Technical Support GroupProblem:When analyzing a model the followng...
View ArticleClik here to view.
Wiki Page: Non-linear Load Sequencing
Applies To Product(s):AutoPIPE,Version(s):2004, XM, & V8iEnvironment: N/AArea: AnalysisSubarea: Original Author:Bentley Technical Support GroupWhenever you have a nonlinear analysis with gaps...
View ArticleClik here to view.
Wiki Page: Export Database (MDB)
Applies To Product(s):AutoPIPE,Version(s):2004, XM, & V8iEnvironment: N/AArea: Import/ExportSubarea: Original Author:Bentley Technical Support GroupComments, Questions, and Answers about exporting...
View ArticleWiki Page: Bentley AutoPIPE Automatic Test Set (ATS)
Bentley AutoPIPE Acceptance Test Set V8iThe Bentley AutoPIPE Acceptance Test Set (ATS) provides the user with a recommended procedure for validating the integrity of the installed AutoPIPE v09.05.01.02...
View ArticleWiki Page: Bentley AutoPIPE V8i SS1 09.02.01.07 Release Notes
AutoPIPE V8i SELECTseries 1 version 09.02.01.07 (March 10, 2010)For more details please visit link below:...
View Article