ファイルやモデルの管理情報まとめ APCファイルとは何ですか？どのように作成しますか？ 部品(拡張)レポート機能の入力モデルリスト機能への移行 AutoPIPEで削除してもモデルに影響がない拡張子は何ですか？ AutoPIPEとProjectWiseの対応バージョン モデルやライブラリなどのファイルはどこに保存されているか AutoPIPEを意図せず閉じてしまった時に回復する手段はありますか？ 応力サマリはどのファイルに保存されていますか？ ユーザープロファイルフォルダに簡単にアクセスする方法 モデルの作成バージョンの確認方法 AutoPIPEのログファイルはどこに保存されていますか
↧
Wiki Page: ファイル/モデル管理
↧
Wiki Page: 入力単位の確認方法
プロダクト: AutoPIPE バージョン: N/A 環境: N/A エリア: N/A サブエリア: N/A AutoPIPEでは数値入力欄をアクティブにすると画面右下でその欄の単位を確認することができます。 Original Author: Yasushi Nagao
↧
↧
Forum Post: E753-18: Cannot be reducer face
When a new segment is inserted at face of a reducer, following error is showing. "E753-18: Cannot be reducer face". How to avoid this error?
↧
Forum Post: AutoPipe can not open the Autopipe report viewer, and popup there is no root element.
AutoPipe report viewer is not working on my system. and a message pops up saying there is no root element.
↧
Forum Post: RE: AutoPipe can not open the Autopipe report viewer, and popup there is no root element.
Go to %AppData%\Bentley\AutoPIPE[XXX]\ Remove 2 files. apipview.xml apipview.ini Then launch the Report Viewer. Note XXX stands for the version of AutoPIPE you have.
↧
↧
Forum Post: RE: AutoPipe can not open the Autopipe report viewer, and popup there is no root element.
Thanks a lot. It was solved. My files were in \AppData\Roaming\Bentley\AutoPIPE CONNECT v12\en.
↧
Wiki Page: F. Readme Release Notes for AutoPIPE Vessel
See the following links for details of each version Read-me Release notes: Multi Language The base version is in English but the UI and the Report can be switched into other languages due to the use of a dictionary file installed with the program. This language dictionary can be selected under Menu> Preferences. Language to include: C German French Russian English Croatian Portuguese Spanish Polish Chinese (Simplified) - _ _ Note: General help is only available in English. AutoPIPE Vessel CONNECT v.43.01.01.011 - Jan 2023 (Latest Version) AutoPIPE Vessel CONNECT v.43.01.00.063 - December2022 AutoPIPE Vessel CONNECT v.43.00.00.121 - September 2022 AutoPIPE Vessel CONNECT v.42.04.00.091 - January 2022 AutoPIPE Vessel CONNECT v.42.03.00.010 - June 2021 AutoPIPE Vessel CONNECT v. 42.02.00.009 - March 2021 AutoPIPE Vessel CONNECT v.42.01.00.005 - December 2020 AutoPIPE Vessel CONNECT v.42.00.00.008 - June 2020 AutoPIPE Vessel CONNECT v.41.05.00.008 - June 2020 AutoPIPE Vessel CONNECT v.41.04.00.013 - Feb 2020 AutoPIPE Vessel CONNECT v.41.03.00.009 - Oct 2019 AutoPIPE Vessel CONNECT v.41.02.00.005 - June 2019 AutoPIPE Vessel CONNECT v.41.01.00.005 - April 2019 AutoPIPE Vessel CONNECT v.41.00.00.006 - Jan 2019 (and higher - CONNECTION Client ) AutoPIPE Vessel CONNECT v.40.07.00.007 - July 2018 AutoPIPE Vessel CONNECT v.40.06.00.007 - March 2018 AutoPIPE Vessel CONNECT v.40.05.00.09 - Dec 2017 AutoPIPE Vessel CONNECT v.40.04.00.08 - Aug 2017 AutoPIPE Vessel CONNECT v.40.03.00.08 - Dec 2016 AutoPIPE Vessel CONNECT v.40.02.00.08 - Aug 2016 AutoPIPE Vessel CONNECT v.40.01.00.09 - April 2016 AutoPIPE Vessel CONNECT v.40.01.00.08 - Feb 2016 English Language Newer version are now released as Multi Language versions, see section above. AutoPIPE Vessel CONNECT v.40.00.00.17 -Dec 2015 AutoPIPE Vessel CONNECT v.40.00.00.11 -Oct 2015 AutoPIPE Vessel V8i v.33.03.01.07 -Mar 2015 AutoPIPE Vessel V8i v.33.03.00.20 -Feb 2015 AutoPIPE Vessel V8i v.33.02.02.04 -July 2014 AutoPIPE Vessel V8i v.33.02.01.08 -April 2014 AutoPIPE Vessel V8i v.33.02.00.06 -Jan 2014 AutoPIPE Vessel V8i v.33.01.00.11 -Aug 2013 Microprotol release notes Brazilian Portuguese Newer version are now released as Multi Language versions, see section above. AutoPIPE Vessel CONNECT v.40.01.00.08 -Feb 2016 AutoPIPE Vessel CONNECT v.40.00.00.14 -Oct 2015 AutoPIPE Vessel CONNECT v.40.00.00.11 -Oct 2015 Chinese Language: Newer version are now released as Multi Language versions, see section above. AutoPIPE Vessel CONNECT v.42.02.00.009 - April 2021 AutoPIPE Vessel CONNECT v.41.04.00.13 - April 2020 AutoPIPE Vessel CONNECT v.41.03.00.009 - Dec 2019 Bentley AutoPIPE Vessel CONNECT Edition v.41.01.00.05 - June 2019 Bentley AutoPIPE Vessel CONNECT Edition v.40.06.00.007 - April 2018 Bentley AutoPIPE Vessel CONNECT Edition v.40.05.00.09 - Feb 2018 Bentley AutoPIPE Vessel CONNECT Edition v.40.04.00.08 - Aug 2017 Bentley AutoPIPE Vessel CONNECT Edition v.40.03.00.08 - Feb 2017 AutoPIPE Vessel CONNECT Edition Update 2 (v40.02.00.08 -Sept 2016 AutoPIPE Vessel CONNECT Edition v.40.00.00.17 -Jan 2016 AutoPIPE Vessel V8i v.33.03.01.07 -Sept 2015 French Newer version are now released as Multi Language versions, see section above. AutoPIPE Vessel CONNECT v.40.03.00.08 -Dec 2017 AutoPIPE Vessel CONNECT v.40.01.00.08 -Feb 2016 AutoPIPE Vessel CONNECT v.40.00.00.17 -Dec 2015 AutoPIPE Vessel CONNECT v.40.00.00.14 -Oct 2015 AutoPIPE Vessel CONNECT v.40.00.00.11 -Oct 2015 German Newer version are now released as Multi Language versions, see section above. AutoPIPE Vessel CONNECT v.40.01.00.08 -Feb 2016 AutoPIPE Vessel CONNECT v.40.00.00.14 -Oct 2015 AutoPIPE Vessel CONNECT v.40.00.00.11 -Oct 2015 Hungarian Newer version are now released as Multi Language versions, see section above. AutoPIPE Vessel CONNECT v.40.01.00.08 -Feb 2016 AutoPIPE Vessel CONNECT v.40.00.00.14 -Oct 2015 AutoPIPE Vessel CONNECT v.40.00.00.11 -Oct 2015 Polish Newer version are now released as Multi Language versions, see section above. AutoPIPE Vessel CONNECT v.40.01.00.08 -Feb 2016 AutoPIPE Vessel CONNECT v.40.00.00.17 -Dec 2015 AutoPIPE Vessel CONNECT v.40.00.00.14 -Oct 2015 AutoPIPE Vessel CONNECT v.40.00.00.11 -Oct 2015 AutoPIPE Vessel V8i v.33.03.00.20 -June 2015 Russian Language: Newer version are now released as Multi Language versions, see section above. AutoPIPE Vessel CONNECT v.40.03.00.08 - April 2017 AutoPIPE Vessel CONNECT v.40.01.00.09 -Sept 2016 AutoPIPE Vessel CONNECT v.40.01.00.08 -Feb 2016 AutoPIPE Vessel CONNECT v.40.00.00.17 -Dec 2015 AutoPIPE Vessel CONNECT v.40.00.00.14 -Oct 2015 AutoPIPE Vessel CONNECT v.40.00.00.11 -Oct 2015 AutoPIPE Vessel V8i v.33.03.01.07 -May 2015 Spanish: Newer version are now released as Multi Language versions, see section above. AutoPIPE Vessel CONNECT v.40.01.00.08 -Dec 2015 AutoPIPE Vessel CONNECT v. 40.00.00.14 -Oct 2015 AutoPIPE Vessel CONNECT v.40.00.00.11 -Oct 2015 See Also Technical information: Release Notes, Product Data Sheet, etc. . Download - Install - License Bentley AutoPIPE Vessel
↧
Wiki Page: Pipe and Vessel Stress Analysis - Wiki
2023 Product/License Consolidation Product Page including pricing - click here Request a Demonstration - click here Log new Case Check for Software Updates Upcoming Live Training Bentley Cloud Services Status ShareFile Status How can we help you? Click here for more information Become a Connected User by signing into Bentley web sites - Registered User Set-up Bentley AutoPIPE Current version: Commercial: 23.00.00.230 QA: 12.08.02.40 AutoPIPE Announcements click here Bentley AutoPIPE Vessel Current Version: 43.01.01.011 AutoPIPE Vessel Announcements click here Bentley AutoPIPE Nozzle Current Version: 08.11.08.38 Bentley PlantFLOW Current Version: 06.02.00.05 Bentley PULS Current Version: 08.09.00.29 ADL PIPE Licensing, Cloud and Web Services and Project Portal Training - Webinar - Help Click here for more information Bentley Store Click here to be transferred to the Bentley Store
↧
Forum Post: Adding multiple nodes
Hi everyone. Relativly new user to AutoPipe connect. Wanted to find out if there is an efficient way to copy multiple nodes / supports for a long pipeline. I have a 1500m long pipeline, made up with 12m long sections of pipe. Each pipe section has 3 Guide supports. I do not want to manually insert the individual pipe supports across 1500m long pipeline as it will take a long time. How can I "copy and paste" or add in multiple pipe supports for a long pipeline. Thanks for any input
↧
↧
Wiki Page: 04. How to perform a direct MSI installation of AutoPIPE v.11 and higher?
Applies To Product(s): AutoPIPE Version(s): v.11 Area: Installation Date Logged & Current Version Oct. 2017 12.06.00.48 Problem: How to perform a direct MSI installation of AutoPIPE? Solution: Use instructions below to extracted MSI files and prerequisites from the AutoPIPE's installation file acquired from Bentley Software downloads: Step #1: Download Download AutoPIPE's installation file using instructions here .. Step #2: Extract MSI files Using Wix installer: AutoPIPE's installation file was created using a program called WIX Burns installer. Therefore download free WIX Toolset from here to extract contents of EXE into individual MSI files. Install the WIX Toolset, no need to install the Visual Studio plugin. a. After installing Wix Tool Set, locate the Dark.exe program. (default location: C:\Program Files (x86)\WiX Toolset vxxx\bin b. Open a CMD prompt c. Change directory to the folder containing the Dark.exe application d. Using the following syntax extract the files to a folder location: dark.exe {Path_to_setup.exe} -x {Directory_Path} Example: Extracting files from AutoPIPE 23.00.00.230 EXE file to a folder called Test dark d:/Setup_AutoPIPEx86_23.00.00.230.exe -x c:/test e. Press Enter (return key ) to run the command. f. The command has completed once the command prompt reappears g. Go to the "Directory path" specified to see the files extracted Note : open the AttachedContainer subfolder (example shown below) Using /Layout switch for EXE Installers This switch (/Layout) creates a complete local copy of the bundle in the directory. Search the internet for detailed instructions to use this switch. Step #3: Install P re-requisites After extracting the MSI files from the AutoPIPE installer EXE file, suggest to first, install all pre-requisites in the following order: Notes: a. Skip any that have already been installed on the computer. b. Pre-requisites listed below may change with different versions of the program. See Release notes for detail list of pre-requisites per version being installed. c. Use command line arguments with Setup.exe to make it install silently: -q or -quiet -s or -silent Pre-requisites Microsoft ® .NET Framework 4.7.2 Microsoft ® VC++ 2015-2019 Redistributable (x86) Microsoft ® VC++ 2015-2019 Redistributable (x64) Microsoft ® Visual C++ 2005 Service Pack 1 Redistributable Package MFC Security Update CONNECTION Client - 11.0.5.34 Step #4: Install Program Next install the program installers Optional applications, install only those planning to use. AutoPIPE Nozzle (Autopipe Nozzle.msi) PCF Translator (PCF Translator.msi) ADL Translator (ADLPipe Translator.msi) STRAIT Translator (STRAIT Translator.msi) ITwins (Setup_iTwinServicesAddInx64_02.03.00.055.msi) Setup_iTwinAnalyticalSynchronizerx64_12.02.01.010.exe Note : ProjectWise Explorer pre-requisites see here . See Also Performing a silent installation Bentley AutoPIPE
↧
Wiki Page: "ASME B31E" Piping Code Enhancements for AutoPIPE
Seismic Design of Piping Systems. New stress categories required by ASME B31E are now added to the program for ASME B31.1, B31.3, B31.4 and B31.8 piping codes. www.youtube.com/watch Note : if an enhancement or defect has not been added to the program, log an Service request for that enhancement. The more requests logged per an enhancement, the quicker the CAE development team will add that feature to the program. The following enhancements and defects have already been requested: Enhancement 109049 - Provide support for B31E Add ASME B31G: Remaining Strength of Corroded pipeline See Also Piping Codes Enhancements & Defects Bentley AutoPIPE
↧
Forum Post: RE: Adding multiple nodes
Greetings, There are a number of ways to perform this task. The tough question is which way is my / your Favorite? Options #1: 1. Insert a Segment. start point 2. Insert Run, set Generate points = xxx, enter length between supports, and press OK button. 3. Select Segment, highlighted red, Insert Support; enter settings as needed, as press OK button. 4. Presto, done!!!. Just created a pipeline 5280 ft long with supports every 10 feet. Option #2: 1. Insert a Segment. start point 2. Insert Run, set Generate points = xxx, enter length between supports, and press OK button. 3. Insert supports as needed 4. Select Node points and supports as needed, (ex. all), enter base point. 5. Use copy and paste command. as needed. Note: one may need to reselect a larger range and paste instead of using original selection. Repeat as needed. 6. Presto, in less than 1 minute there is a pipeline over 6000 ft long etc... At this point make modifications to node points, and supports using the input grids. Regards, Mike Dattilio Design Analysis Engineering Group Senior Analyst Bentley Systems Inc =============================================================================
↧
Forum Post: RE: Spiral wound material
Greetings Ottap Cp, As mentioned in AutoPIPE help: Select the gasket material. The gasket material is used to determine the gasket seating stress, y, and strength factor, m, based on Table 2-5.1 (Division 1), Table 4.16.1 (Division 2), of Table XI-3221.1-1 (Appendix XI), depending on the Analysis Method selected. The drop-down list consists of every material included in those tables. This field is set to "Spiral Wound Alloy with Mineral Fiber Fill" by default. Therefore reference the code for gasket specifications or contact the respective code committee for a clear definition. Regards, Mike Dattilio Design Analysis Engineering Group Senior Analyst Bentley Systems Inc =============================================================================
↧
↧
Wiki Page: E753-18 Cannot be reducer face
Applies To Product(s): AutoPIPE, Version(s): 23.00.00.230 Area: Error Message Original Author: Bentley Technical Support Group Problem: The following is displayed while running AutoPIPE: E753-18 Cannot be reducer face Solution: This Error pops up if a segment is starting with Reducer and you try to insert a new segment from the face of the reducer. Work around to get rid of this error is as follows: 1. Insert a small run or pipe spool at the face of the reducer first. As you can see in the screen shot below, A pipe spooI inserted at A14 to A16 of 1 foot (this dimension could be anything -even equals to weld length also). 2. Now you can insert a new segment to A16 node no. without any Error. As shown in the screen shot below. See Also Error Messages Bentley AutoPIPE
↧
Wiki Page: "Error" messages displayed in AutoPIPE
AutoPIPE Preview Handler error on installation Closed loop detected in imported model at TEE point XXX. E15-13: PXD file is needed for accessing AutoPLANT data in this model Please place PXD and PXH files in same directory as DAT file. E13-16: Cannot Find the specified units file E13-63: Invalid code material(s) detected. E21-40: Executing this operation can corrupt distributed load records in AutoPIPE E31-37: Material type not recognized. Re-enter E36-42: Tie/Link must be connected to another point E36-43: Connected point cannot be the current point E36-70: Cost must be greater than zero E38-95: Cannot insert component after a tee E39-27: Zero length not permitted E40-100: ASME B31J requires angle to be greater than 5.0 deg and less than 60 deg E54-79: No Joint Type & User SIF at the selected location(s) E90-21: Analysis results do not exist E90-43: Structural Synchronizer not installed on the system. E102-155: This point must be an anchor/reference point E102-161: This point does not have reference point defined E119-1: Maximum number of load combinations exeeded E131-30: AUTOPIPE.CLR not found E154-16: This value must be between 0 and 2, recommended value is 0.5 E156-38: Value must be greater than zero E175-28: Error in velocity profile specification E221: Please contact Rebis E511-1: Invalid AutoPIPE data file E512-65: the model cannot be opened E512-109 cannot open Projectwise model E512-149: Model name must not contain space character before extension E514-2: Unable to retrieve Time History Load and Time History files E516-8: Demo version limit of 20 points exceeded E516-11: Analysis terminated: model must have more than one point E521-22: Base point is not on selected range E521-24: No range specified for copying E522-32: Cannot find clipboard file in current directory E522-33: Cannot complete the paste operation E523-21: No Range specified for rotation E527-25: Point not found in selected range E723-23: System is not complete for analysis purposes E726-104: Zero length not allowed at beam XX E732-1: Angle is 0 deg. at bend xxx E732-2: Angle is 180 deg. at bend xxx E732-3: Not enough clearance to fit bend xxx E737-26: Valve components are not permitted in HDPE pipe system as per CC N-755-1 E751-1 Tee type gt 8 or lt 1. SIF not calculated E753-18 Cannot be reducer face E774-44: Equation requires more combinations to be complete E801-1: FATAL ERROR: Unstable System E801-3: No static load cases specified E801-4: Zero length element E801-5: Zero Element Stiffness in AutoPIPE E801-6: Zero flexible length beam E801-11: Fatal Error: no mass in the system E801-12: Cannot find next frequency E801-24: Number of MSRS groups is inconsistent with SAM case - Error Message in AutoPIPE E801-62: Unable to process any time history function E801-64: Undefined point name in time history load data E801-75: Cannot allocate memory for analysis, unload some applications. E801-77: Multiple use of same THP file name at a point. May copy and rename E801-135: Number of analysis nodes exceeds maximum limit of 10000 nodes E829-1: Incorrect model size in file Static analysis results will be ignored. E951-1: No default available. Re-enter E951-3: Expecting real input. Re-enter Answer: insert a valid value into the current field before selecting a different cell / OK button. Example: Spaces at the end of "Line class", in PIPE ID properties. E951-31: Cannot find or read autoplan.cnf file. Please reinstall the program. Only solutions; a. copy CNF from coworker to install folder or, reinstall the application. E962-1: File read error, please contact BENTLEY E962-2: File write error, check disk space E963-8: Non-ascii characters or "?" are not permitted in name E963-21: Number of characters in name cannot exceed 48 E2164-15: Qualified stress for all bend and tee components should be greater than zero Error 1316 - A network error occurred while attempting to read from the file LoadLibrary failed with error 87 LoadLibrary failed with error 1114: A dynamic link library (DLL) initialization routine failed No load case is selected to print time history results No Piping with OD >= 1.400 inches is found in PXF file Program failed to generate C2 file "Root Element Is Missing" The model you are about to open as last modified in a newer version... Time history analysis file (*.TIM) does not exist. Also See: Warnings, Errors, Crashed, Confirm Messages
↧
Forum Post: RE: E753-18: Cannot be reducer face
Greetings Rajesh, To avoid this error please follow the steps listed in the Wiki link here . Shrey Sharma Technical Support Engineer,Global Technical Support, Bentley Systems,Inc. 9 th Floor, Tower C, DLF IT Park, 8 Major Arterial Road,Newtown, Kolkata – 700156 T: + 91-2066021018 www.bentley.com
↧
Wiki Page: Application Crashed or Freezes - AutoPIPE
Note : a. What to do when AutoPIPE crashes? b. Options available to recover a model that was closed before being properly saved Symptoms and messages displayed when AutoPIPE program stops working properly: Messaged Displayed: Item #1: "Bentley AutoPIPE Application has stopped working" A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Item #2: " Bentley AutoPIPE Application has stopped working" Windows can check online for a solution to the problem Item #3: Bentley AutoPIPE Application has stopped working: "A problem caused the program to stop working correctly. Please close the program" Item #4: Program periodically freezes, toolbars disappear, and application crashes - AutoPIPE V8i 09.05.01.02 Item #5: Bentley AutoPIPE is (NOT RESPONDING) Item #6: The application has failed to start because of IEGLic.dll was not found Item #7: Microsoft Blue Screen - A problem has been detected and Windows has been shut down to prevent damage to your computer Item #8: Faulting module name: ntdll.dll Item #9: AutoPIPE Report Viewer has stopped working Item #10: Faulting application name: Bentley.Licensing.Service.exe Crashed when performing: Question: Is this an valid AutoPIPE model? (click here) A. Opening a model B. Importing / Inserting a model C. On start-up: D. Computer Mouse pointer constantly shows thinking status every few moments. Fix: confirm LMT error checking is turned OFF. see last step on WIKI page HERE . E. Analyze> All or Analyze> Static F. File> Save Stress Isometric All G. Model Consistency Check H. Installing I. Results> Output Report J. Working with Input / Results grids K. Viewing Load> Dynamic Analysis Dialog Screen L. No specific reason M. Copy / Pasting N. Modifying / Inserting Components O. Modifying General / Edit / Results Model Options Also See: Warnings, Errors, Crashed, Confirm Messages in AutoPIPE
↧
↧
Wiki Page: N. Issues related to AutoPIPE crashing when making modifications on piping component dialog
Select the following links that details know reasons why AutoPIPE would crash / freeze when modifying piping component: 1. Beams 2. Valves See Also Bentley AutoPIPE has crashed Bentley AutoPIPE
↧
Wiki Page: 02. When inserting Valve component and AutoPIPE crashes, why?
Applies To Product(s): AutoPIPE Version(s): ALL; Area: Date Logged & Current Version Sept. 2023 23.00.00.230 Problem: When inserting a Valve component the application crashes, why and how to avoid? Solution: Steps to repeat: 1. Insert a valve component. 2. When valve dialog appears, manually modify the Name Of Point and Tag No. with a customize value. 3. Press OK button 4. Current node point remains at the start of the valve and never moves to the end of the valve to continue modeling. 5. Top bar of application displays (Not Responding). Avoidance: When inserting valve components, do not change or customize Name Of Point or Tag No. . Make other modification to the dialog as needed and press OK button. Finish inserting run points and other components on the segment. When completed, open the Model Input grids, and adjust the To point names as needed (Imaged below, change K07 to 345) Likewise, select the Valve input grids and make adjustments to Tag No. and other settings as needed. See Also Crash issues that occur when making modifications / inserting piping components Bentley AutoPIPE
↧
Wiki Page: 01. Download - Install - AutoPIPE Nozzle
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Area: Installation Original Author: Bentley Technical Support Group Comments, Questions, and Answers about installing AutoPIPE Nozzle: Item #1: Bentley AutoPIPE Nozzle Release Notes Item #2: How to download and install AutoPIPE Nozzle? Answer : AutoPIPE Nozzle has been integrated into the installer of AutoPIPE. Another words, it is an option to install during installation of AutoPIPE V8i 09.05.01.02 - 12.08.04.009. This option is by default checked ON, but can be unchecked as desired to prevent the application from being installed. Only if it this feature was unchecked or installing AutoPIPE Yearly (ex. 2023 or higher) would the application not be installed with AutoPIPE. x Item #3: How to install AutoPIPE Nozzle 08.11.08.xx and higher if the installation option to install was unchecked during installation of AutoPIPE V8i? Answer : Uninstall AutoPIPE, and re-install AutoPIPE V8i confirming AutoPIPE Nozzle option is checked ON as shown above. After the installation is complete, verify it has been installed by selecting Start> All Programs> Bentley Engineering> AutoPIPE Nozzle icon should now be listed, start the program as desired. OR Item #4: Versions of AutoPIPE Nozzle that have been released: Versions of AutoPIPE Nozzles installed with AutoPIPE No longer released 8.11.8.38 AutoPIPE 12.08.01.010 to 12.08.04.009 08.11.08.37 AutoPIPE 12.07.00.346 08.11.08.36 AutoPIPE 12.06.00.048 to AutoPIPE 12.05.00.06 08.11.08.35 AutoPIPE 12.04.00.14 to AutoPIPE 12.00.00.14 08.11.08.32 AutoPIPE 11.04.00.10 to AutoPIPE 11.01.00.17 08.11.08.31 AutoPIPE 11.00.00.22 08.11.08.26 AutoPIPE 10.01.00.09 to AutoPIPE 10.01.00.05 08.11.08.24 AutoPIPE 10.00.00.10 08.11.08.23 AutoPIPE 09.06.02.06 to AutoPIPE 09.06.01.10 08.11.08.22 AutoPIPE 09.06.00.19 08.11.08.20 AutoPIPE 09.06.00.15 to AutoPIPE 09.05.01.02 08.11.08.20 AutoPIPE 09.05.01.05 08.11.07.19 Separate application install 08.11.07.02 Separate application install Item #5: How much does it cost to upgrade? Answer: Select here See Also Licensing AutoPIPE Nozzle Table Of Contents Bentley AutoPIPE
↧