Wiki Page: Bentley AutoPIPE V8i SELECTseries 5 (v09.06.00.15)
New Features In AutoPIPE V8i (SELECTseries 5) v09.06.00.15 Date Posted: 10/04/2013 08:44:47AM Platforms: Windows XP Windows Vista Windows Vista x64 Windows XP x64 Windows 7 Windows 7 x64...
View ArticleForum Post: RE: Allowable stress in expansion case showing as zero
Naanhari, There are ASTM materials data transferred to EN13480 libraries, so it is possible that your work can be done relatively quick and smooth - just edit data assigned in piping ID (second Tab...
View ArticleForum Post: RE: Auto pipe seismic and wind loading..
Hello Raj, Please see the online help of the AutoPIPE version being used to determin which version of ASCE is being used. Samhuff, was correct that if you want to see the visual impact of the load on...
View ArticleForum Post: RE: ASME B31.3&31.8
Hello Mykola, To answer your question: why AutoPipe use as default tnom for sustain and occasional loads for ASME B31.8. Please review the code, note almost all code equations specify t = nominal wall...
View ArticleFile: AutoPIPE Automated Test Set
Download, Install, and Run AutoPIPE Automated Test Set
View ArticleWiki Page: •"Non-Code Comb." tab questions
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: combinations Subarea: Original Author: Bentley Technical Support Group Comments, Questions, and Answers about...
View ArticleWiki Page: Bentley AutoPIPE Automatic Test Set (ATS)
Bentley AutoPIPE Acceptance Test Set V8i The Bentley AutoPIPE Acceptance Test Set (ATS) provides the user with a recommended procedure for validating the integrity of the installed AutoPIPE...
View ArticleWiki Page: W31-86: No allowable stresses are available for the selected...
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: warning Subarea: Original Author: Bentley Technical Support Group Problem: The following appears when I select a...
View ArticleWiki Page: Results (Output) Grids - AutoPIPE
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Results Subarea: Original Author: Bentley Technical Support Group Comments, Questions, and Answers AutoPIPE...
View ArticleForum Post: Systems Operating in the Creep Regime
Does AutoPIPE have any current or planned abilities for evaluating systems operating at or above the creep threshold? Currently it is possible to evaluate these systems, but there is an error that...
View ArticleWiki Page: Model Soil Properties in AutoPIPE
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Modeling Subarea: Original Author: Bentley Technical Support Group Attention: Please see the following AutoPIPE...
View ArticleWiki Page: User encounters a licensing error when attempting to open the...
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Licensing Subarea: Original Author: Bentley Technical Support Group Problem User encounters a licensing error...
View ArticleWiki Page: Wind - AutoPIPE Load Case
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Load Case Subarea: Original Author: Bentley Technical Support Group Comments Questions and Answers about Wind...
View ArticleWiki Page: Displacement sub report using Results> Output Report in AutoPIPE
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Reports Subarea: Original Author: Bentley Technical Support Group Comments, Questions, and Answers for...
View ArticleWiki Page: Reports - AutoPIPE
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: reports Subarea: Original Author: Bentley Technical Support Group Comments, Questions, and Answers on AutoPIPE...
View ArticleForum Post: RE: Systems Operating in the Creep Regime
Good question What possibilities are you thinking about? Keep in mind creep (fatigue/rupture) is a time-dependent failure (mode) that cant be modelled through static analysis. Most design codes do not...
View ArticleForum Post: RE: Systems Operating in the Creep Regime
The Euro code EN13480 in AutoPIPE handles materials in the creep range. It contains many ASME materials when you select the source as ASME. There is a recent related post on how to change piping code...
View ArticleForum Post: RE: Bending Stress in Pipeline Elastic bends
In most cases these initial stresses are ignored as are circumferential weld stresses. Similarly, for buried pipe the overburden soil load will add stresses which often are analyzed separately. These...
View Article