Wiki Page: 08. Values of modulus of elasticity and factor B are not correct...
Applies To Product(s): AutoPIPE Vessel Version(s): ALL Area: General Date Logged & Current Version Nov 2023 44.00.00.111 Problem: Why values of modulus of elasticity considered in external pressure...
View ArticleForum Post: ASME B31.3-2022 validity
We are currently operating Bentley AutoPIPE Advanced 2023 version 23.00.01.367 which is limited to ASME B31.3- 2020. Our client has requested the equipment supplied be designed and fabricated to the...
View ArticleForum Post: RE: SIF and Flexibility Factors for d/D
So, generally phrased: for any tee used in AP (AutoPIPE), provide the tee type is under the scope of B31J, AP will do all those things for you and not require the user to insert any intermediate rigid...
View ArticleForum Post: Mitred bend
I am trying to create a mitred bend as shown in the image below. I tried to do this with selecting a wide or close bend with 1 cut, but this did not seem to work and the bend became over-utilised when...
View ArticleForum Post: RE: SIF and Flexibility Factors for d/D
That is correct. The rigid length requires thermal expansion consideration as well. Note that this only applies to B31J-enabled models at this time.
View ArticleWiki Page: Tutorial - Water Hammer (Time History) Example - Modeling Approach...
Applies To Product(s): AutoPIPE, Version(s): all Area: Modeling Original Author: Bentley Technical Support Group Comments, Questions, and Answers related to "Water Hammer (Time History) Example" in...
View ArticleForum Post: RE: Mitred bend
Greetings, Suggest that you spend a little time and following AutoPIPE help section: Help > Contents> Contents Tab> Modeling Approaches> Modeling Approaches> Bends > Miter Bends...
View ArticleForum Post: RE: ASME B31.3-2022 validity
Greetings Daniel, Please recall that all new feature request are no handled on our IDEAs page. See WIKI here for instructions to post a new idea and to vote on existing ideas to help them become apart...
View ArticleWiki Page: Q. Eq. 11 is missing from the stress summary of ASME NC 1972 +1972...
Applies To Product(s): AutoPIPE Version(s): ALL; Area: Date Logged & Current Version April 2024 23.00.01.367 Problem: Eq. 11 is missing from the stress summary of ASME NC 1972 +1972 W addenda in...
View ArticleWiki Page: ASME BPV-III-1-NC, AutoPIPE Nuclear Piping Code FAQ
Note: Please see the following AutoPIPE help section: Help > Contents> Contents Tab> Reference Information> Code Compliance Calculations> select a piping code to see the calculations...
View ArticleForum Post: Non-standard sections in Staad not properly imported in Autopipe...
Hello, I have an Autopipe model in AP 2023 that I interface with Staad using SQLite Pipelink. I have several user defined sections in Staad, which used to be properly imported in Autopipe v12.08.00.063...
View ArticleWiki Page: Error Messages
Error Code 032768 - Program has encountered an error and will close now Error Code 25 - Insufficient strength in shell/channel joint Error Code 27 - Longitudinal membrane stress in the tubes exceeded...
View ArticleWiki Page: Error Code 795 - API 650: design temperature >93 deg C.
Applies To Product(s): AutoPIPE Vessel Version(s): 44.00.01.014 Environment: N/A Area: Error Original Author: Bentley Technical Support Group Problem: The following occurs when I perform the Strength...
View ArticleForum Post: RE: Non-standard sections in Staad not properly imported in...
Greetings, Upfront I am not aware of any changes to the pipelink import process. Regardless, questions like this require a model to be reviewed and tested. Please log a case with technical support for...
View ArticleWiki Page: Q. Install multiple versions of AutoPIPE on the same computer
Applies To Product(s): AutoPIPE, Version(s): ALL Area: Installation Original Author: Bentley Technical Support Group Problem: AutoPIPE: install multiple ver. same computer Can we install multiple...
View ArticleWiki Page: 29. "ATS - Automatic Test Set" Enhancements & Defects logged for...
Note: if an bug or feature has not been added to the program, log an new case in the Support Portal. The more requests logged per an issue, the quicker the CAE development team will add that feature to...
View ArticleWiki Page: 0. Library Editor
The Tools > Tools > Library Editor command enables you to manage (add, remove, edit) the AutoPIPE Material Library data. The Table drop-down enables you to select the Standard Material ( MATL )...
View ArticleWiki Page: 01c. i. Add New Material to Existing Library, AutoPIPE V8i v.9.0...
Applies To Product(s): AutoPIPE Version(s): All Area: Library Original Author: Bentley Technical Support Group Dec 2014, AutoPIPE V8i 09.06.01.10 Problem: How to add a new material to existing library,...
View ArticleWiki Page: "Failed to install Bentley Connection Client; 0x800705b4 mentioned...
Applies To Product(s): AutoPIPE Version(s): ALL; Area: Install Date Logged & Current Version Aug 2022 12.08.01.010 Problem: The fallowing appears when trying to install AutoPIPE Failed to install...
View Article