Forum Post: Von Mises stress
How to get Von Mises stress of beam and column member by space frame analysis
View ArticleForum Post: RE: Von Mises stress
Hello Khasim, AutoPIPE V8i 09.06.00.15 provides force and moment results for all beam members in a model. It does not provide a stress analysis of beam structures. Please use a program like STAAD for...
View ArticleForum Post: RE: Modeling a 90 degree ell (like half of a Tee) in Autopipe
Mike, I think I stated that the fitting had a radius. The point was that a forged elbow has more material than a standard butt welded elbow, this should effect the elasticity of the elbow. And...
View ArticleForum Post: RE: Modeling a 90 degree ell (like half of a Tee) in Autopipe
Hello SamHuff, My reply above was directed at the original person (sammyboy) who posted the question. I apologize if I have offended you. If you wish to consider the extra wall thikness then add a new...
View ArticleWiki Page: Code Stress Plot color legend reverts to non-default colors...
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Graphics Subarea: Original Author: Bentley Technical Support Group Problem: In my AutoPIPE model, when I review...
View ArticleWiki Page: Graphics - AutoPIPE
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Graphics Subarea: Original Author: Bentley Technical Support Group Comments, Questions, and Answers on graphic...
View ArticleWiki Page: New AutoPIPE user - Suggested information - AutoPIPE
Opening a file with AutoPIPE: Any version of AutoPIPE can and will open any DAT file created by the program. However, there are rules: ___Rule #1: Only open a model DAT file created by the current...
View ArticleForum Post: RE: Modeling a 90 degree ell (like half of a Tee) in Autopipe
Wow, I am embarrassed. HVN and I were discussing, I didn't look at the user name above who posted the question. My apologies.
View ArticleWiki Page: Modeling Approaches, Tips, Technique for Bend Piping Components in...
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Modeling Subarea: Original Author: Bentley Technical Support Group Attention: Please see the following AutoPIPE...
View ArticleWiki Page: Warnings, Errors, Crashed, Confirm - AutoPIPE
Topics under the heading should be based on: Application Warnings Messages Application Error Messages Application Confirm Messages Application Crashed Application Visual Fortran run-time errors...
View ArticleWiki Page: AutoPIPE.exe - No disk message is displayed In AutoPIPE
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: Error message Subarea: Original Author: Bentley Technical Support Group Problem: User selects HELP, CONTENTS,...
View ArticleWiki Page: FAQ's - Specific to Shell and Tube Heat Exchangers in AutoPIPE Vessel
Applies To Product(s): AutoPIPE Vessel, Version(s): V8i Environment: N/A Area: FAQ Subarea: Original Author: Bentley Technical Support Group Comments, Questions, and Answers: Question #1: What can I...
View ArticleWiki Page: Code Compliance output report subsection in AutoPIPE
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: report Subarea: Original Author: Bentley Technical Support Group Comments, Questions, and Answers: Item #1: What...
View ArticleForum Post: Static seismic and equivalent thermal expansion for buried pipes
A user query : Hi, How should acuratelly be modeled static seismic load for a pipeline with aboveground and underground sections? I've set a static coeficient for seismic load case, which will apply...
View ArticleForum Post: RE: Time History Analysis
Mike, Thanks for your reply. The modal analysis runs but reaches a point where it says it can't calculate the next frequency. Then, when I run the time history it says my time step is not small...
View ArticleForum Post: RE: Static seismic and equivalent thermal expansion for buried pipes
Hello Galin, "Static Seismic" loads are applied to the base of all support springs in a model. This would include both structural (i.e. V-stops, guides, etc..) and all soil points (note - soil points...
View ArticleWiki Page: How to download, install, and license AutoPIPE 6.0, 6.1, 6.2, 6.3?
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: install Subarea: Original Author: Bentley Technical Support Group Problem: AutoPIPE 6.xx:Download, install,...
View ArticleWiki Page: AutoPIPE Resutls Grids or Output Reports are found to be Zero...
Applies To Product(s): AutoPIPE, Version(s): 2004, XM, & V8i Environment: N/A Area: reports / results Subarea: Original Author: Bentley Technical Support Group Problem: AutoPIPE: results are 0 /...
View ArticleForum Post: RE: Static seismic and equivalent thermal expansion for buried pipes
Hi Mike, Thank you for your response. I just want to confrim. Autopipe does calculate "static seismic (earthquake)" loads for aboveground and undeground pipes correctly using static seismic...
View ArticleForum Post: RE: Static seismic and equivalent thermal expansion for buried pipes
Hello GalinG, With regards to your question: Q1. I just want to confrim. Autopipe does calculate "static seismic (earthquake)" loads for aboveground and undeground pipes correctly using static...
View Article